Manual Seiko 8B54 (page 10 of 12) (English)

757420

Zoom out

Zoom in

1/12

167

Theoperationisnowcompleted.

Push the crown back.

Pushthe

crownback.

※Relockthecrown.

→P.10 7

※Ifthedayoftheweekremainsincorrecteven

afterasuccessfulradiosignalreception,the

preliminarypositionofthedayhandmaybe

misaligned.

→

Howtocorrectthepreliminarypositions

P.16 9

Troubleshooting

012

166

Thewatchentersthemanualdayof

theweeksettingmode.

Keep pressing down the Button A (for 3

seconds) until the second hand moves

to point to the 55-second position.

ButtonA

for3seconds

Press the Button B to set

the day of the week.

Toadvanceoneday

Pressthebuttononceandrelease.

Toadvance

rapidly

Keeppressingdownthebuttonforlongerthan2seconds.

Pressthebuttononceagaintostop.

ButtonB

※Turningthecrownwillnotmovethehand.

※Whilethedayoftheweekismoving,the

buttoncannotbeoperated.

※Thedayoftheweekhandcanonlymove

forward.Itcannotmovebackward.

※

PresstheButtonB

withyourfingeror

withanobjectwith

alongtaperedtip.

　→P.10 6

Troubleshooting

BSB8B54 p095-188 欧文.indd 166-167 19.11.6 11:31:42 AM

169

How to correct the preliminary positions

■ Setting the preliminary position of the date, day hand, hour

and minute hands

The preliminary position of the date is the “ 1st.”

The preliminary position of the day hand is “M.”(Monday)

The preliminary positions of the hour and minute hands are “0:00 AM.”

Whenthenumericalnumberofthedateisnotlocatedatthecenterofthewindow,it

canbecorrectedbythesameproceduresasmentionedabove.

To correct the preliminary positions, perform the operation on the next page.

When the preliminary positions are incorrect, the correct date, day of the week

or time cannot be displayed even if the watch receives radio signals.

In such a case, by correcting the preliminary positions, wrong date or day

indication, loss or gain of the time can be corrected.

Troubleshooting

168

Troubleshooting

Preliminary position

When the watch is unable to display the precise time date or day even if it successfully receives

a radio signal with the correct time zone setting, the preliminary position may be misaligned.

Thepreliminarypositionmaybemisalignedduetothefollowingreasons.

　･

IInthecaseofhavingastrongimpact:Misalignmentofthetimeanddatemayoccurwhendroppingorhittingthewatch.

　･

Inthecaseofamagneticinuence:Misalignmentofthetimeanddatemayoccurwhenbringingthewatchclosetoanobjectwhichgeneratesmagnetism.

　Exampleofcommonmagneticproductsthatmaya󱐯ectwatches.　P.143

Whencomparingthestateof“MisalignedPreliminaryHandPosition”tothatofaweightscale,itislike“ascale

whichisunabletodisplaythecorrectweightbecauseitsneedleisnotsettothezeropositionbeforeweighing.”

Thehour,minute,andsecondhandshavean“AutomaticHandPositionAdjustment

Function,”whichautomaticallycorrectsanincorrectpreliminaryposition.

AutomaticHandPositionAdjustmentFunctionactivatesonceaminuteforthesecond

handandat12:00bothfortheAMandPMforthehourandminutehands.

※

Thisfunctionworkswhenthepreliminaryhandpositionismisalignedduetoexternalfactorssuchasstrongimpactormagnetic

inuence.Itdoesnotworktoadjustaccuracyofthewatchorslightdeviationswhichmayoccurduringthemanufacturingprocess.

■

Automatic Hand Position Adjustment Function (Function to automatically adjust the preliminary position of the hour and minute hands)

■ Setting the preliminary position of the date and the day

Sincethepreliminarypositionofthedateandthedayisnotautomaticallyadjusted,itmustbeadjustedmanually.

→Settingthepreliminarypositionofthedate　P.169

BSB8B54 p095-188 欧文.indd 168-169 19.11.6 11:31:43 AM

171

ボタンB

1回押すと

少し進む

Within 20 seconds after the

date stops, press the Button

B to set the date to “ 1.”

2 3



Makesurethatthenumericalnumber“1”

islocatedatthecenterofthedatewindow.

※

If“1”isalreadydisplayedinthedatewindow,moveontotheprocedure③.

Keep pressing down the Button A (for

3 seconds) until the second hand stops

pointing to the 55-second position.



Thewatchentersthepreliminaryposition

settingmodefordayoftheweek.

ButtonAfor

3seconds

ButtonB

Toadvance

rapidly

Keeppressingdownthebuttonforlongerthan2seconds.

Pressthebuttononceagaintostop.

Tone-tune

Keeppressingdownthebuttonaslongasyouwanttoadvancethenumericalnumber.

Troubleshooting

Continued on the next page.

170

Within 20 seconds after

procedure ① is completed

and the date stops, start the

operation of procedure ② .

※Ifthewatchisleftuntouchedfor

20secondsafterthedatestops,

thewatchautomaticallyreturns

totheTIMEdisplaymode.Ifthis

happens,restarttheoperationfrom

procedure①.

■ Setting the

preliminary positions

of the date, day hand,

hour and minute

hands (Continued)

Keep pressing down the Button A and B (for 4 seconds) at the same

time until the second hand stops pointing to the 13-second position.

※First,presstheButtonB,andsubsequentlypressthe

Button A whilekeepingholdingdowntheButtonB so

astopressbothofthemsuccessfully.

※

Whilethedateismoving,thebuttoncannotbeoperated.

※Donotpullthe

crownout.

※

PresstheButtonB

withyourfingeror

withanobjectwith

alongtaperedtip.

→P.10 6



Thewatchentersthepreliminarypositionsettingmode

fordate.Thedatewillstarttomoveandstopatthe

preliminaryposition.

ButtonA

ButtonB

Troubleshooting

PressSimultaneously

for4Seconds

BSB8B54 p095-188 欧文.indd 170-171 19.11.6 11:31:43 AM

76 Press the Button B once

and release it.

After completing the operation, leave

the watch untouched for 20 seconds.

Thewatchautomaticallyexitsthe

preliminarypositionsettingmode,

andthesecond,hourandminute

handsstartmoving.

WhenthewatchreturnstotheTIME

displaymode, checkif thetime, date

anddayoftheweekareallcorrect.

Ifthetime,dateanddayoftheweek

arenotcorrect,manuallysetthem.

Adjustingthetimeanddatebyreceivingaradiosignal

Howtoconductmanualreception→P.156

Whenthewatchisunabletoreceivearadiosignal

Howtomanuallysetthetime→P.160

Howtomanuallysetthedate→P.162

Howtomanuallysetthedayoftheweek→P.165

Press

theButton

Bonce



Thehourandminutehandsstartto

moveandstoppointingat“0:00am.”

173

Troubleshooting

Press the Button B to set the

day hand to point to “M.”

Makesurethatthedayhandissetto

pointto“M.”

ButtonB

Keep pressing down the Button A (for 3 seconds) until

the second hand stops pointing to the 0-second position.



Thewatchentersthepreliminaryposition

settingmodeforhourandminutehands.

※

Ifthehourandminutehandsarealreadyindicatingthecorrecttime,

moveontotheprocedure⑦.

ButtonAfor

3seconds

172

Toadvance

rapidly

Keeppressingdownthebuttonforlongerthan2seconds.

Pressthebuttononceagaintostop.

Tone-tune

Keeppressingdownthebuttonaslongasyouwanttoadvancethedayhand.

Troubleshooting

※Ifthedayhandisalreadypointingto“M”,

moveontotheprocedure⑤.

BSB8B54 p095-188 欧文.indd 172-173 19.11.6 11:31:44 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 8B54 in the language / languages: English as an attachment in your email.

The manual is 8,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Seiko 8B54 Manual

Product: