779969
9
Zoom out
Zoom in
Previous page
1/10
Next page
ENGLISHENGLISH
Please be aware, to prevent damage to the frame and cables there should be minimum cable
clearance between the bottom of the bottom bracket and the cables.
The measurement should be a minimum of 25mm taken in the centre line of the bottom
bracket, as indicated in the image.
BB STANDARDS/FD MOUNTING DETAILS
The SCOTT SPARK has a Press fit PF92 bottom bracket with an inner diameter of 41mm, this
is a press fit system and special tools are required for removal and refitting, please contact
your SCOTT dealer for assistance.
The SCOTT SPARK (non RC models) uses a high direct mount side swing front derailleur
only, this must be used with the use of an FD adaptor plate.
It is not possible to mount a front
derailleur to RC frames/bikes.
ADJUSTMENT
We recommend all adjustments are carried out by your local authorized SCOTT dealer but
basic maintenance and checks should be done regularly before each ride as described in the
general manual that was supplied with your bike.
Please pay attention to all instructions and torque settings, if you have any doubts please
contact your dealer,
*in addition to the torque settings please note all bikes with a dropper type seatpost
have a seatpost clamp maximum torque of 5 N/M.
The inserts are marked
A-E, these letters dictate
what cables can be used;
these are the same for left
and right.
HT:
this is the cover plate
for all cable options
A:
1x Mechanical cable
D:
1x single cable & Di2
HT-Blank:
this is the no cable option
B:
2x Mechanical cables
E:
Single cable and
Live valve
C:
2x mechanical cables
1x hydraulic
If you wish to change or replace the headtube cableguide set
on your SCOTT Spark this kit can be ordered from your local
SCOTT dealer.
SCOTT part number: 266587 and consists of:
2x HT/A/B/C/D
1x HT-Blank/E
These cable guides are fitted with a single bolt, the fixing torque of this must not exceed
0.75-1 N/M.
With the many different cabling options it is possible to customise the cable routing slightly
depending what components you wish to run, it is recommended that handlebar cables
that come from the right hand side enter the frame on the left, and handlebar cables that
come from the left hand side enter the frame on the right, while this is not crucial to the
performance of the bike it may help to
prevent any cable rub
Below is an example of a bike set up
European style” with a 1X set up and a
dropper seatpost.
Please note that below is an example
and that your bikes brakes need to be
set up as per the law in your country,
please check with your local SCOTT
dealer for this information.
17 |
BIKE USER MANUAL | SPARK MY2017SPARK MY2017 | BIKE USER MANUAL
| 16
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Spark 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Spark 2018 in the language / languages: English as an attachment in your email.

The manual is 0.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Spark 2018

Scott Spark 2018 User Manual - German - 10 pages

Scott Spark 2018 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info