779969
8
Zoom out
Zoom in
Previous page
1/10
Next page
ENGLISHENGLISH
If your dropout needs to be replaced, we recommend this work should be carried out by
your local SCOTT dealer as the rear derailleur may need adjustment, failure to adjust this
correctly may result in accident or damage to your bike.
IMPORTANT!
We recommend all work should be carried out by your authorised SCOTT dealer!
If you wish to change this item yourself, please ensure the bike is supported correctly to
prevent damage by referring to the general manual instructions supplied with your bike.
Before installing the new hanger first
make sure the area is clean; insert
the hanger.
Insert the end cap through the frame and
into the hanger.
Make sure the location arrow is pointing
to the lower bolt hole; insert the bolt (Max
torque 1.5 N/M)
Insert the second bolt in the rear of the
dropout (Max torque 1.5 N/M)
(Carbon swingarm fitting shown)
PIVOT MAINTENANCE
The pivot and bearings on the SCOTT SPARK are easy to maintain.
If you have to change the bearings or pivots please consult your local SCOTT dealer for the
purchase and fitting of the kit as special tools are required for disassembly and reassembly.
To prolong the life of your pivot bearings an external treatment with water repellent after
every bike wash will help repel excess water. We do not recommend heavy grease sprays
since these will leave a film on the parts which are difficult to remove. We recommend the
same for the chain also after washing and before chain lube; Do not let spray or oils come
into contact with the disc brake pads or rotor!
Please refer to the manuals supplied with this bike for wash and care instructions for your
SCOTT bike.
Once the bike is reassembled please insure the wheels are refitted correctly and the gears
are set correctly including the over shift stops, please consult your authorized SCOTT dealer
for assistance.
CABLE GUIDES AND CABLING
On the SCOTT Spark carbon the cable guides on the headtube can be changed if required
so different cable configurations can be used.
The main cover plate of the cable guide is available in two options:
-HT-Blank: this can be used when no cables are to be routed.
-HT: this is open and can be used for different cable options.
If cables are to be routed you must select the correct insert for the cover depending on the
configuration you require, the inserts can be easily changed in cover plate once the cables
have been removed and the cover removed from the bike.
15 |
BIKE USER MANUAL | SPARK MY2017SPARK MY2017 | BIKE USER MANUAL
| 14
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Spark 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Spark 2018 in the language / languages: English as an attachment in your email.

The manual is 0.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Spark 2018

Scott Spark 2018 User Manual - German - 10 pages

Scott Spark 2018 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info