Manual Scheppach DH1200MAX (page 14 of 44) (English, German, Dutch, French)

781646

Zoom out

Zoom in

1/44

14 GB

Tool removal (Fig. 4)

Pull back and hold the locking sleeve (2) and remove

the tool.

Dust collection device (Fig. 5)

Slide the dust collection device (a) over the drill bit be-

fore carrying out any hammer drilling vertically above

your head.

Starting up

Important.

To prevent all danger, the machine must only be

held using the two handles. Otherwise there may

be a risk of suffering an electric shock if you drill

into cables.

Switching on and off (Fig. 1)

To switch on: Press the control switch (4).

To switch off: Release the control switch (4).

Setting the operating mode (Fig.6)

The operating mode of the power tool is selected with

the mode selector switch

Note: Change the operating mode only when the

machine is switched off! Otherwise, the machine can

be damaged.

– Turn the mode selector switch to the requested

position.

• Position for hammer drilling (A): When the drilling

tool does not immediately rotate upon switching on,

allow the machine to run slowly until the drilling tool

rotates.

• Vario-Lock (B) position for adjustment of the

chiselling position

• Position for chiselling (C)

Important.

Only low pressure is required for hammer dril-

ling. Excessive pressure will exert an unnecessary

force on the motor. Check the drill bits at regular

intervals. Sharpen or replace blunt drill bits.

Replacing the power cable

If the power cable for this equipment is damaged, it

must be replaced by the manufacturer or its aftersales

service or similarly trained personnel to avoid danger.

Cleaning and maintenance

Always pull out the mains power plug before starting

any cleaning work.

Cleaning

• Keep all safety devices, air vents and the motor

housing free of dirt and dust as far as possible. Wipe

the equipment with a clean cloth or blow it with com-

pressed air at low pressure.

• We recommend that you clean the device immediately

each time you have nished using it.

• Clean the equipment regularly with a moist cloth and

some soft soap. Do not use cleaning agents or sol-

vents; these could attack the plastic parts of the equip-

ment. Ensure that no water can seep into the device.

Carbon brushes

In case of excessive sparking, have the carbon brushes

checked only by a qualied electrician. Important! The

carbon brushes should not be replaced by anyone but

a qualied electrician

Maintenance

There are no parts inside the equipment which require

additional maintenance.

Disposal and recycling

The unit is supplied in packaging to prevent its being

damaged in transit. This packaging is raw material and

can therefore be reused or can be returned to the raw

material system.

The unit and its accessories are made of various types

of material, such as metal and plastic. Defective com-

ponents must be disposed of as special waste. Ask your

dealer or your local council.

Storage

Store the equipment and accessories out of children’s

reach in a dark and dry place at above freezing tempe-

rature. The ideal storage temperature is between 5 and

30 °C. Store the electric tool in its original packaging.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DH1200MAX in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DH1200MAX Manual

Product: