50953
3
Zoom out
Zoom in
Previous page
1/20
Next page
pag. 1
Manual SA 250
PCG/C SA 250 Manual 27-03-07
General
Thank you for purchasing this SATEX precision balance !
This scale is equipped with reliable technology and has user friendly operational software.
You will use it many times and it will prove itself to be an easy, speedy and accurate tool.
If any questions raise that are not described in this manual, please address yourselves to your SATEX supplier,
have a look at our website : www.satex.nl
or send your questions per email to : info@satex.nl
Application, Weight and Measures certified
The SA 250 platform scale balance is designed for accurate and legal weighing, for counting of articles and
for check weighing and filling with settable weight setpoints with LED indicators in the front panel.
The scale is designed for use in dry, inside conditions. The weigh platform is equipped with an IP 65 water-
and dust tight HBM off centre loadcell..
Take care of a stable position of the scale. Place it in accurate level position with the help of the 4 leveling feet
and the level indicator down below the pole. Important : all 4 of the feet should carry the scale equally.
The CE (OIML R76 1992 class III) Certificate of this scale is valid in all European countries.
It is permitted to use the scale, if stamped individually, for weighing for trade purposes. However there is no
difference between the accuracy of a stamped or not stamped scale. Even if the scale has been purchased
without the legal stamping, it may be stamped later on, if the scale still is in good condition.
Safety
Please read this manual thoroughly before start using the scale.
The supplier does not accept any responsibility if the guidelines of this manual are not observed.
Before any work is done on the scale, power connections from the mains adaptor and the internal battery should
be interrupted. Warranty is void if the scale is opened anyhow.
Breaking of the seal of a stamped scale is a criminal act and causes the complete disapproval of the scale.
The instrument fulfils the requirements laid down in the EG regulations 89/336/EWG and 73/23/EWG for
electromagnetic compatibility and the Council Directive 90/384/EEC for not automatic weighing machines. Exceeding
of the maximum values, laid down in these regulations, must be avoided.
Electrostatic discharges may cause fatal damage to the scale and should be avoided
at all times. I.e. a proper earth connection of the scale and the place of erection is required in such cases.
The mains adaptor has no special protection against humidity and water and should not come into contact with it.
In case this has happened, or the adaptor shows any external damage, the adaptor should not be used any longer.
The built in lead battery should, if it has to be replaced, be disposed off as small chemical waste, not to be added to
normal waste.
Maintenance
Except from regular cleaning with a slightly humid cloth and a not aggressive detergent, further maintenance
is not required. The stainless steel platform plate may be removed to clean the inside of the weigh platform.
However it makes sense to check the scale’s weighing accuracy with regular intervals, using accurate calibration
weights.
Stamped scales are sealed, but a not stamped scale may be adjusted by the user itself using accurate Class M1
weights.
WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel +31 36 522 20 30
Patroonsweg 23-27 Email info@ weegtechniek.nl Fax +31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satex . . SA 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satex . . SA 250 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satex . . SA 250

Satex . . SA 250 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info