699892

Satel MKP-300 Manual

3
Zoom out
Zoom in
Previous page
1/4
Next page
SATEL MKP-300 3
4.1 Changing own code
1. Press in turn the and keys. 2 short beeps will confirm starting the function. The
LED will start blinking.
2. Enter the current code. 2 short beeps will confirm the correct code entry. The
LED will start
blinking.
3. Enter the new code and confirm with the
key (or press the key to cancel changing the
code). 4 short beeps followed by 1 long beep will confirm the change of code.
4.2 Adding new code
1. Press the key with digit corresponding to the number of code to be added (if a code with this
number already exists, it will be changed).
2. Press the
key. 2 short beeps will confirm starting the function. The LED will start
blinking.
3. Enter the administrator code. 2 short beeps will confirm the correct code entry. The
LED will
start blinking.
4. Enter the new code and confirm with the
key (or press the to cancel adding the code).
4 short beeps followed by 1 long beep will confirm the addition of new code.
4.3 Deleting code
1. Press the key with digit corresponding to the number of code to be deleted.
2. Press the
key. 2 short beeps will confirm starting the function. The LED will start
blinking.
3. Enter the administrator code. 2 short beeps will confirm the proper code entry. The
LED will
start blinking.
4. Enter 0000 and confirm with the
key (or press the key to cancel deleting the code).
4 short beeps followed by 1 long beep will confirm the deletion of code.
5. Security system operation
After registration in the MICRA module, the keypad will let you arm or disarm the system and clear
alarms. The functions of output control and alarm triggering are available if the MICRA module is
configured accordingly by the installer.
5.1 Arming
Enter the code and then press the key. Sending the arming command will be confirmed by 3
short beeps and the
LED coming on.
5.2 Disarming and alarm clearing
Enter the code and then press the key. Sending the disarming / alarm clearing command will be
confirmed by 3 short beeps and the
LED coming on.
5.3 Output control
1. Press and hold down for about 3 seconds the key to which the control function is assigned (the
installer can assign the control function to keys 1-4). 2 short beeps will confirm starting the
function. The
and LEDs will start blinking.
2. Enter the code. 4 short beeps followed by 1 long beep will confirm the sending of control
command.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MKP-300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MKP-300 in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MKP-300

Satel MKP-300 User Manual - German - 4 pages

Satel MKP-300 User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info