2726
MTS
2) USING SOUND MENU : METHOD 2
Press the MENU button. Move the
cursor to SOUND by pressing the CH
/ buttons and press the VOL
+
button.
Move the cursor to MTS by pressing the
CH
/ buttons.
Press the VOL
+
/
-
buttons.
Whenever this button is pressed, the mode will be changed as follows.
SOUND ADJUSTMENT
11
11
22
22
33
33
STEREO SAP MONO
MENU
PICTURE
SOUND
TIME
SET UP
FUNCTION
SEL. + ENTER
SOUND
*
50 BASS
*
50 TREBLE
*
00 BALANCE
*
MTS : STEREO
ON AIR
SEL.
+
SET
SOUND
*
50 BASS
*
50 TREBLE
*
00 BALANCE
*
MTS : STEREO
ON AIR
SEL.
+
SET
SOUND
*
50 BASS
*
50 TREBLE
*
00 BALANCE
*
MTS : SAP
ON AIR
SEL.
+
SET
MTS
1) USING MTS BUTTON : METHOD 1
Your TV set incorporates an MTS (Multichannel Television Sound) decoder to receive stereo
broadcasts and any accompanying SAP (Second Audio Program), such as a bilingual
broadcast.
1. Press the MTS button
Whenever this button is pressed, the reception mode will be changed as follows.
The " ", " " symbols indicate that MTS mode is being broadcasted.
STEREO symbol (RED color)
SAP symbol (RED color)
When the power is switched on or channel is changed, the " ", " " symbols are
automatically displayed, depending on the current broadcast.
SOUND ADJUSTMENT
NOTES
If the received signal is weak, noise may be heard.
In such a case, press MTS button to set to the MONO mode for better sound reception.
If the received SAP signal is weak, the SAP will not be heard.
Even if both STEREO and SAP broadcasts are received, both broadcasts cannot be
heard at the same time.
Transmission of CABLE TV signals may differ from off-air TV broadcasts.
TV 2
STEREO SAP MONO
