Manual Ruwido Easytip 3 (page 3 of 22) (English, German, Dutch, French, Italian, Swedish, Norwegian, Finnish)

489757

Zoom out

Zoom in

1/22

Introduction

The Next Generation of Universal Remote Control

Congratulations purchasing easytip, the universal infrared remote

control for your TV set and SAT-Receiver.

Easytip is a product of high quality

All information on this product is published with no consideration

for possible patent rights. Trademarks are mentioned without gu-

arantee of their free use.

Although a lot of care was taken when creating this manual with

its text and graphic images, errors can never be completely

eliminated.

Therefore, the manufacturer cannot be made liable for faulty

statements and their possible consequences.

You are very welcome to contact the manufacturer for report

errors and to make suggestions for improvement.

1998 by ruwido

reproduction and electronic storage.

Printed in Austria.

ruwido-austria

Köstendorfer Straße 8

A-5202 Neumarkt am Wallersee

tel. +43(0)6216/4571

fax +43(0)6216/457126

e-mail: service.easytip@ruwido.com

Internet: http://www.ruwido.com

English

Inserting and changing the batteries

Your easytip is powered by two (alkaline) 1.5 V batteries (IEC LR

03, AAA)

Insert the batteries following the markings in the battery compart-

ment.

After inserting the batteries, your easytip is adjusted for TV-ope-

ration.

If the LED does not blink as usual when pressing the keys or if

the device you are controlling fails to respond from the usual di-

stance then the batteries must be changed.

Your easytip includes a intermediate memory which prevents the

easytip from losing its memory during the battery changing.

Please dispose batteries carefully.

Description of keys

Image

a Light-emitting diode (LED)

b Level key to switch to device level (TV, SAT, AUX)

c Number keys: 0-9

d -/--: single/double digit enter, 10, 1-

e Power/Standby (on/off)

f P+/P-: switch to next or previous channel

g +/- Vol: Volume control

h Mute: Sound on/off

i OK/Norm:

For TV: Reset TV set to basic settings and confirmation-key for

TV-menu

For SAT: Confirmation-key for menu of receiver

j• For TV: Using the teletext-function

k • For TV: Function of the Videotext-keys

• For SAT: Radio: Radio operation

• TV/SAT: Switch between TV/SAT

l Menu: calls the menu-function for TV and SAT

m Info: calls the Info-function, Index, S 100

n AV: switch to the AV-channel (e.g.: VCR, SAT)

o Shift: preselection key for adjustment of brightness, color,

contrast, treble, bass, balance.

Programming easytip

Programming by Code entering

1. Switch on the device you want to use your easytip with.

2. Turn to the TV code list (other manual) and look for the name

of your device manufacturer.

3. Choose your device by using the Level key (image b) and

press the key (for about 5 seconds) until the LED blinks twice.

NOTE: The AUX-mode (image b) can be programmed any way

(alternate TV set, alternate VCR, alternate SAT-receiver).

After the LED (image a) flashing twice, press any Level key

(image b), depending on which device you want to have on the

AUX channel (image b).

4. Enter the first 3-digit code from the list with the number keys

(image c) on your remote control.

ATTENTION!

The first figure of the 3-digit code must be entered within 5 se-

conds of the LED (image a) blinking twice.

Otherwise the LED (image a) will flash once and you will have to

repeat the procedure from step 3.

5. After the 3-digit code has been entered the LED (image a) will

blink twice to indicate that the code has been accepted.

English

Bedin ET3 Version 1 07.03.2001 14:27 Uhr Seite 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ruwido Easytip 3 in the language / languages: English, German, Dutch, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ruwido Easytip 3 Manual

Product: