Manual Russell Hobbs 24440-56 (page 4 of 96) (All languages)

705954

Zoom out

Zoom in

1/96

BEFORE FIRST USE

• Remove any labels, stickers or packaging from the iron and soleplate.

• Before using the iron for the rst time, or if it’s not been used for a long time, iron a scrap piece of

cotton (an old towel is ideal) to remove any accumulated residues.

• Don’t worry if the iron smokes a bit at rst, it will soon stop as the manufacturing residues evaporate.

FILLING/REFILLING

You may use the iron with tap-water, but if you live in a hard water area, you should use distilled water (not

chemically descaled or softened water).

If you buy distilled water, check that it’s suitable for use in irons.

1. Remove the reservoir by pulling it away from the body of the steam generator using the grip on the

front of the reservoir .

2. Fill the reservoir to the max mark. Do not exceed the max mark.

3. Ret the reservoir into the base unit.

PRELIMINARY SETTINGS

1. Put the iron on top of the base unit.

2. Put the plug into the power socket (switch the socket on, if it’s switchable).

3. Turn the unit on by setting the on/o button to I.

4. Turn the temperature control to bring the setting you require next to the mark. The thermostat light

will ash until the iron has reached its desired temperature. Once the temperature has been reached

the light will remain on.

5. Use the steam control to select the amount of steam you want

( m= low, l= medium, h= high).

TEMPERATURE SELECTION GUIDE

1. Check for textile care symbols (i j k l).

2. Iron fabrics needing low temperatures rst, then those that need medium temperatures , and nish

with those needing high temperatures (or max).

3. Turn the temperature control to bring the setting you require next to the mark.

If the instructions on the fabric label dier from this guide, follow the instructions on the label.

abel marking

Dot setting

j cool – nylon, acrylics, polyester

•

k warm – wool, polyester mixtures

• •

l hot – cotton, linen

• • •/max

i do not iron

When the soleplate reaches operating temperature, the thermostat light will stay permanently on.

STEAM IRONING

1. If you intend to use steam, the temperature setting must be at

or higher.

2. Use the steam control to select the amount of steam you want

( m= low, l= medium, h= high).

3. Squeeze the steam button to produce steam, release it to stop.

NOTE: When you rst start your steam station and pull the trigger for steam ironing, there will be a

delay as your steam station pumps water from the reservoir to prime the system. This is normal

and may take 20-30 seconds. This will also happen after relling the reservoir.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 24440-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 24440-56 Manual

Product: