705913
3
Zoom out
Zoom in
Previous page
1/48
Next page
3
Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved.
Children must not use or play with the appliance. Keep the appliance and
cable out of reach of children.
Always disconnect the appliance from the mains supply socket if it is left
unattended and before assembling, disassembling or cleaning.
c Misuse of the appliance may cause injury.
If the cable is damaged, it must be replaced by the manufacturer, its
service agent, or someone similarly qualified, to avoid hazard.
b Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
Don’t use the appliance for any purpose other than those described in these instructions.
Don’t use accessories or attachments other than those we supply.
Don’t operate the appliance if its damaged or malfunctions.
Don’t run the mixer for more than 5 minutes at a time, or it’ll overheat. After 5 minutes, let it rest for 5
minutes. Your mixer will automatically switch off after 5 minutes of continuous use.
HOUSEHOLD USE ONLY
PARTS
1. Drive heads (underneath)
2. Whisks
3. Vents
4. Speed control
5. Handle
FITTING THE WHISKS
1. Switch off (
0
) and unplug your mixer before fitting or removing the whisks.
2. Turn each whisk to align the pips on the shaft with the slots in the drive head, then push it into the
drive head till it clicks into place.
To remove the whisks:
1. Switch your mixer off (
0
) and unplug it.
2. Hold the whisks (to prevent them jumping out) and press the eject button (
5
). This will eject them
from the drive heads.
USING THE MIXER
1. Move the switch up to switch on.
2. Put the plug into the power socket.
3. Choose a speed between 1 (low), and 5 (high).
4. Slide the switch fully downwards (0) to switch off.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 22230-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 22230-56 in the language / languages: All languages as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info