489802

Russell Hobbs 17880-56 Manual

4
Zoom out
Zoom in
Previous page
1/92
Next page
4
C SWITCH ON
10 Set the temperature control to •.
11 Put the plug into the power socket.
12 Press the b button. The b light will glow.
13 Press the d button. The d light will glow.
14 When the boiler is ready to generate steam (2-3 minutes), the S light will glow.
15 It will then cycle on and off as the thermostat operates to maintain the temperature.
16 Turn the temperature control to bring the setting you want (see the guide below) next to the
1 mark.
17 The thermostat light will glow.
18 When the iron reaches the set temperature, the thermostat light will go off.
19 It will then cycle on and off as the thermostat operates to maintain the temperature.
20 Initialize the iron.
C INITIALIZATION
21 Initialize the iron after filling the reservoir, to get water and steam through the system.
22 Hold the iron below the base unit, and press the steam button, on top of the iron.
23 Initially, the pump will be noisy. When it quietens, steam will come out of the soleplate.
24 The iron is now initialized and ready for use.
i SHOT OF STEAM
25 Press the steam button to produce steam, release it to stop the steam.
h STEAM IRONING
26 For a constant stream of steam, press the steam button, then slide the latch (on the rear of
the button) back, towards the rear of the iron, to lock the button down.
27 Slide the latch forward, to unlock it, and revert to normal use.
l VERTICAL STEAMING
28 Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.
29 Check that there is adequate ventilation behind the fabric, otherwise moisture may build up,
causing mildew.
30 Check that there is nothing behind the fabric that may be damaged by the steam.
31 Check that pockets, turn-ups, and cuffs are empty.
32 Set the temperature control to max.
33 Lift the iron off the fabric.
34 Press the steam button to produce steam, release it to stop the steam.
n DRY IRONING
35 You can dry iron by just not pressing the steam button, but if you want to make sure you
don’t press it accidentally, then you should iron with an empty reservoir.
36 Do your dry ironing first, then switch off, fill the reservoir, and do your steam ironing.
e LOW WATER
37 When the water level gets low, the e light will flash.
38 Switch off, unplug, fill, and initialize.
C AFTER USE
39 Sit the iron on the base unit.
40 Set the temperature control to •.
41 Press the b button. The b light will go off.
42 Press the d button. The d light will go off.
43 Unplug the appliance.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 17880-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 17880-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info