489802
3
Zoom out
Zoom in
Previous page
1/92
Next page
3
14 Don’t use accessories or attachments other than those we supply.
15 Don’t use the appliance for any purpose other than those described in these instructions.
16 Don’t scratch the soleplate – avoid buttons, zips, etc.
17 The appliance has a protective thermal fuse, which will blow if it overheats. If this happens,
the appliance will stop working, and must be returned for repair.
18 Don’t operate the appliance if it’s dropped or damaged, or if it malfunctions or leaks.
19 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
household use only
U BEFORE USING FOR THE FIRST TIME
•Remove any labels, stickers or packaging from the iron and soleplate.
•Don’t worry if the iron smokes a bit at first, it’ll stop as the element cures.
•Iron an old piece of cotton fabric, to clean the soleplate.
C PREPARATION
1 Check for textile care symbols (i j k l).
2 Iron fabrics needing low temperatures j first, then those that need medium temperatures
k, and finish with those needing high temperatures l.
temperature setting guide
label marking temperature setting
j cool – nylon, acrylics, polyester
k warm – wool, polyester mixtures ••
l hot – cotton, linen •••/max
i do not iron
, If the instructions on the fabric label differ from this guide, follow the instructions on the
label.
X FILLING
3 Press the b button.
4 Press the d button.
5 Unplug the appliance.
6 Remove the reservoir.
a) Grip the bottom front of the reservoir
b) Press the catch on the top rear of the reservoir.
c) Pull the reservoir out of the base unit
d) MAX is marked across the top of one of the tubes.
e) Pour water into the other tube
f) Don’t add anything to the water – you’ll damage the iron.
g) Fill the reservoir to the MAX mark.
7 Replace the reservoir.
8 Slide the reservoir into the base unit till the catch clicks into place.
9 Initialize the iron.
instructions
diagrams
1 cap
2 hole
3 steam button
4 lock
5 thermostat light
6 cable and steam pipe
7 temperature control
8 steam vents
9 soleplate
10 catch
11 nozzle
12 reservoir
13 base unit
14 grip
15 lights
16 buttons
17 anti-scale cartridge
18 water
19 press to initialize
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 17880-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 17880-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info