Manual Russell Hobbs 14993-56 (page 3 of 92) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

509708

Zoom out

Zoom in

1/92

3 Iron an old piece of cotton fabric, to clean the soleplate.

4 Press the S and * buttons 3 or 4 times, to check them.

C PREPARATION

5 Check for textile care symbols (i j k l).

6 Iron fabrics needing low temperatures j ﬁrst, then those that need medium temperatures

k, and ﬁnish with those needing high temperatures l.

X FILLING

, Do your dry ironing ﬁrst, then switch oﬀ, ﬁll the reservoir, and do your steam ironing.

7 The iron may be used with tap-water, but if you live in a hard-water area, you should use

distilled water (not chemically descaled water).

8 If you buy distilled water, check that it is marketed as suitable for irons.

9 Don’t add anything to the water – you’ll damage the iron.

10 Unplug the appliance.

11 Open the water inlet cover.

12 Tilt the iron till the water inlet cover is vertical.

13 Pour water from the jug into the water inlet.

14 Pour slowly, to allow the air in the reservoir to escape, and avoid an airlock.

15 Don’t ﬁll past the max mark on the reservoir, or water will escape in use.

16 Close the water inlet cover.

17 Wipe up any spillage.

C SWITCH ON

18 Sit the iron on its heel.

19 Put the plug into the power socket.

20 Turn the temperature control to bring the setting you want (see the guide below) next to the

notch.

21 The light will glow.

22 When the iron reaches the set temperature, the light will go oﬀ.

23 It will then cycle on and oﬀ as the thermostat operates to maintain the temperature.

temperature setting guide

label marking temperature setting

j cool – nylon, acrylics, polyester •

k warm – wool, polyester mixtures ••

l hot – cotton, linen •••/max

i do not iron

, If the instructions on the fabric label diﬀer from this guide, follow the instructions on the

label.

C REDUCING TEMPERATURE

24 Reducing temperature takes longer, as the appliance has to lose heat.

25 Organise your ironing so you don’t need to reduce the temperature (“preparation” point 6).

n DRY IRONING

26 Do your dry ironing ﬁrst, then switch oﬀ, ﬁll the reservoir, and do your steam ironing.

27 Wait till the light goes oﬀ, then start ironing.

instructions

diagrams

1 light

2 temperature control

3 steam available

4 notch

5 water inlet

6 water inlet cover

7 spray nozzle

8 soleplate

9 steam vents

10 reservoir

11 heel

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 14993-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 14993-56 Manual

Product: