324061

Russell Hobbs 14723 56 steamglide professional Manual

5
Zoom out
Zoom in
Previous page
1/8
Next page
5
vertical steaming
39 Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.
40 Check that there’s adequate ventilation behind the fabric, otherwise moisture may
build up, causing mildew.
41 Check that there’s nothing behind the fabric that may be damaged by the steam.
42 Check that pockets, turn-ups, and cuffs are empty.
43 Check that there’s water in the reservoir.
44 Turn the temperature control to max, move the steam control to S.
45 Hold the iron close to (but not touching) the fabric.
46 Press the S button (you’re using the “shot of steam” function
vertically).
47 You may have to press it 2 or 3 times to pump water through the system.
48 Leave 4 seconds between shots, to let the temperature build up.
after use
49 Turn the temperature control to •, move the steam control to S.
50 Unplug the iron.
51 Lift the bottom of the water inlet cover to open it.
52 Hold the iron over a sink, turn it upside down, and drain the water
from the reservoir.
caution the water may be hot
53 Sit the iron on its heel.
54 Leave it to cool down completely.
55 When it’s cold, wipe off any moisture, and close the water inlet cover.
56 Store the iron on its heel, to avoid corrosion and damage to the soleplate.
self clean
57 To prevent scale building up, use the self clean function regularly, at least monthly in
normal water areas, more often in hard water areas.
58 You’ll need a basin or a large bowl to catch the water coming
out of the soleplate.
59 Fill the reservoir to the max mark.
60 Turn the temperature control to max, move the steam control
to S.
61 Sit the iron on its heel.
62 Put the plug into the power socket, and wait till the
thermostat light goes out.
63 Now hold the iron over the basin or bowl, with the soleplate down (#9).
64 Move the steam control to C, hold it there, and gently move the iron to and fro,
over the basin or bowl.
caution keep clear of the escaping water and steam
65 Water and steam will wash scale and dust through the soleplate, and into the sink.
66 When the reservoir is empty, release the self clean button.
67 Unplug the iron, and sit it on its heel to cool.
68 When it’s cold, wipe off any moisture.
69 Store the iron on its heel, to avoid corrosion and damage to the soleplate.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 14723 56 steamglide professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 14723 56 steamglide professional in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info