324061
3
Zoom out
Zoom in
Previous page
1/8
Next page
3
18 Don’t use the iron for any purpose other than those described in these instructions.
19 Take care not to scratch the soleplate – avoid buttons, zips, etc.
20 The iron has a protective thermal fuse, which will blow if it overheats. If this happens,
the iron will stop working, and must be returned for repair.
21 Don’t use the iron if its dropped or damaged, or if it malfunctions or leaks.
22 If the cable is damaged, return the iron, to avoid hazard.
household use only
before using for the first time
Don’t worry if the iron smokes a bit at first, it’ll stop as the element cures.
Iron an old piece of cotton fabric, to clean the soleplate.
Press the ~ button 3 or 4 times, to check it out.
Press the * button 3 or 4 times, to check it out.
preparation
1 Check for textile care symbols (i j k l).
2 Iron fabrics needing low temperatures j first, then those that need medium
temperatures k, and finish with those needing high temperatures l.
filling (#2)
3 You may use the iron with tap-water, but if you live in a hard water area, you should
use distilled water (not chemically descaled or softened water).
4 If you buy distilled water, check that it’s marketed as suitable for use in irons.
5 Unplug the iron.
6 Turn the temperature control to , slide the steam control to S (#3).
7 Hold the iron with the soleplate down (#2).
8 Lift the bottom of the water inlet cover to open it.
9 Pour slowly, to let the air in the reservoir escape, otherwise
you’ll cause an air lock and the water will overflow.
10 Don’t fill past max, or water will escape in use.
11 Wipe up any spillage.
switch on
12 Turn the temperature control to .
13 Sit the iron on its heel.
14 Put the plug into the power socket (switch the socket on, if it’s switchable).
15 Turn the temperature control to bring the setting you want next to the 5 mark (#3).
16 The thermostat light will come on.
17 When the iron reaches the temperature you set, the thermostat light will go off. It’ll
then cycle on and off as the thermostat operates to maintain the temperature.
temperature setting guide
label marking temperature dot setting
j cool – nylon, acrylics, polyester
k warm – wool, polyester mixtures
l hot – cotton, linen /max
i do not iron
, If the instructions on the fabric label differ from this guide, follow the instructions
on the label.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 14723 56 steamglide professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 14723 56 steamglide professional in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info