588333
8
Zoom out
Zoom in
Previous page
1/9
Next page
1413
Cutting Difficult Materials and Materials that Create a Lot of Dust
Before trying to cut difficult materials, you should familiarize yourself with how the tool works
by cutting wood. To cut hard materials like metal and some plastics, more pressure has to be
applied from above.
WARNING! Never cut a material that generates dust or dangerous fumes when working,
such as some plastics and materials that contain asbestos.
Sheet Metal
a) Adjust the cutting depth so it is at least 1 mm greater than the thickness of the material.
Always place scrap material under the work piece.
b) Eliminate any deep scratches and rusty areas from the surface of the material,
since they make it much more difficult to move the tool forward.
c) After every 2 minutes spent cutting metal, you should stop for at least a 3-minute break
to let the tool cool down.
Recommendation: Use suitable cutting fluid if necessary.
Floor tiles, slate and similar materials
a) Always use the right cutting blades for this job.
b) Always connect the tool to a suitable dust extractor. The dust generated during cutting can be
hazardous to the health and clog the blade guard.
c) Place adhesive or duct tape on the base plate to facilitate cutting and prevent any scratching.
Drywall
a) This tool can be used to cut sheets of drywall but with certain limitations. Use it only to make
cuts and always connect it to a dust extraction device while you are working. The dust can affect
how the blade guard works.
INSTRUCTIONS FOR USE
WARNING
Remove the plug from the wall outlet before cleaning or doing maintenance work on the tool.
Cleaning
a) Keep protectors, ventilation holes and the motor body as free of dust and dirt as possible.
b) Wipe the tool with a clean cloth or use low-pressure compressed air.
c) Clean the tool immediately after each use.
d) Do not use any cleaning products or solvents that could damage the plastic parts.
Make sure water does not get inside the tool.
Storage
When the tool is not in use, place it in the storage case and store it in a dry, well-ventilated place
out of reach of children, such as a high cupboard or a closed space.
CLEANING & MAINTENANCE
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotorazer Platinum at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotorazer Platinum in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info