Manual Rotorazer Platinum (page 3 of 9) (English)

588333

Zoom out

Zoom in

1/9

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating the Rotorazer

Saw® Platinum. DO NOT USE a Rotorazer Saw® Platinum while you are tired or under the influ-

ence of drugs, alcohol or medication. A moment of inattention while operating Rotorazer Saw®

Platinum may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate

conditions will reduce risk of personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the OFF-position before connecting to

a power source and/or battery pack, picking up or carrying the tool. Carrying Rotorazer Saw®

Platinum with your finger on the switch or powers up Rotorazer Saw® Platinum may invite

accidents.

d) Remove any adjusting key or wrench before turning the Rotorazer Saw® Platinum ON. A wrench

or a key left attached to a rotating part of the Rotorazer Saw® Platinum may result in personal

injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better control

of the Rotorazer Saw® Platinum in unexpected situations.

f) Use suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

g) Whenever dust extraction or dust collection devices are needed for connection, ensure these

are connected and properly used. Use of dust collection can reduce dust-related hazards.

4) Rotorazer Saw® Platinum use and care

a) Do not force the Rotorazer Saw® Platinum. Use the correct power tool for your application. The

correct power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the Rotorazer Saw® Platinum if the switch does not turn it ON and OFF. Any Rotoraz-

er Saw® Platinum that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source from the Rotorazer Saw® Platinum before making

any adjustments, changing accessories, or storing the Rotorazer Saw® Platinum. Such preventive

safety measures reduce the risk of starting the Rotorazer Saw® Platinum accidentally.

d) When idle, store Rotorazer Saw® Platinum out of the reach of children and do not allow persons

unfamiliar with the Rotorazer Saw® Platinum or these instructions to operate the Rotorazer Saw®

Platinum. Rotorazer Saw® Platinum is dangerous in the hands of untrained users.

e) Take care of your Rotorazer Saw® Platinum. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the Rotorazer Saw® Platinum’s opera-

tion. If damaged, have the Rotorazer Saw® Platinum repaired before use. Many accidents are

caused by a poorly maintained power tool.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the Rotorazer Saw® Platinum, accessories and tool bits etc. in accordance with these instruc-

tions, taking into account the working conditions and the work to be performed. Use of the

Rotorazer Saw® Platinum for operations different from those intended could result in a hazard-

ous situation.

h) Use a clamp or other practical way to secure and support the work piece to a stable platform.

5) Service

Have your Rotorazer Saw® Platinum serviced by a qualified repair person using only identical

replacement parts. This will ensure that safety of the tool is maintained.

Turn off the Rotorazer Saw® Platinum immediately if:

1) The power plug and/or power cord are defective.

2) The switch is defective.

3) Smoke comes out or there is a burning smell.

General Rotorazer Saw® Platinum Safety Warnings

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instruc-

tions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for

future reference. The term "Rotorazer Saw® Platinum" in the warnings refers to your electric

(corded) Rotorazer Saw® Platinum or battery-operated (cordless) Rotorazer Saw® Platinum.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate Rotorazer Saw® Platinum in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Rotorazer Saw® Platinum can create sparks which may ignite

the dust or fumes.

c) Keep children and bystanders away while operating Rotorazer Saw® Platinum. Distractions

can cause you to lose control.

2) Electrical safety

a) Rotorazer Saw® Platinum plugs must match the outlet. Never modify the plug in any way. Do not

use any adapter plugs with earthed (grounded) Rotorazer Saw® Platinum. Unmodified plugs and

matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c) Do not expose Rotorazer Saw® Platinum to rain or wet conditions. Water entering Rotorazer

Saw® Platinum will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the Rotorazer

Saw® Platinum. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entan-

gled cords increase the risk of electric shock. Do not use the cord for purposes other than those

for which it was designed.

e) When operating Rotorazer Saw® Platinum outdoors, use an extension cord suitable for outdoor

use. Using a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating Rotorazer Saw® Platinum in a damp location is unavoidable, always use a residual

current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Use Proper Extension Cord. Make sure your extension cord is in good condition. When using an

extension cord, be sure to use one heavy enough to carry the current your product will draw. An

undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table 1

shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt,

use the next heavier gauge. The smaller the gauge number, the heavier the cord.

SAFETY WARNINGSSAFETY WARNINGS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rotorazer Platinum in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rotorazer Platinum Manual

Product: