532626
40
Zoom out
Zoom in
Previous page
1/112
Next page
GB-40
Operation
1. Select the Pulse programme „CARDIO“ with the UP/DOWN
buttons and confi rm with the MODE button.
2. Set your age using the UP/DOWN buttons and confi rm
with the MODE button.
3.
Now set one of the sub-programmes (55%/75%/90%/
TAG) by pressing the UP/DOWN buttons and confi rm with
the MODE button.
4. If you wish to specify the workout parameter TIME, use
the UP/DOWN buttons to select the required value and
confi rm with the MODE button.
5. Finally, press the START/STOP button to begin the work-
out. This is also possible if you have not selected a wor-
kout parameter before.
You can interrupt your workout by pressing the START/STOP
button. Press the START/STOP button again to continue your
workout. If you wish to stop your workout completely, press
the RESET button instead. This will bring you back to the
programme selection.
D Watt programme (WATT)
In this programme, the computer automatically selects
the intensity resistance in dependence on the speed and
the selected watt value.
1. Select the Watt programme (WATT) with the UP/DOWN
buttons and confi rm with the MODE button.
2. Now set the required watt value by pressing the UP/
DOWN buttons and confi rm with the MODE button.
3. If you wish to specify the workout parameter TIME, use
the UP/DOWN buttons to select the required value and
confi rm with the MODE button.
4. Finally, press the START/STOP button to begin the work-
out. This is also possible if you haven`t selected a work-
out parameter before.
During the workout you can increase or decrease the watt
value (WATT) with the UP/DOWN buttons. You can interrupt
your workout by pressing the START/STOP button. Press the
START/STOP button again to continue your workout. If you
wish to stop your workout completely, press the RESET but-
ton instead. This will bring you backto the programme se-
lection.
As soon as the preset parameter has counted down to
zero, you will hear an acoustic signal and the workout
programme stops automatically.
You may use the chest strap supplied as an alternative
to the hand sensors. Make sure you position the strap
close to your heart and that the strap has good skin
contact.
Make sure you always work out with the target pulse
specifi cation suitable for you. Observe the notes and
the exercise parameters chapter.
WARNING
The computer will emit an acoustic signal when you are
stepping too quickly or too slowly.
As soon as the preset parameter has counted down to
zero, you will hear an acoustic signal and the workout
programme stops automatically.
REX_Trainer_RX401E_13.indd GB-40REX_Trainer_RX401E_13.indd GB-40 06.05.13 09:4106.05.13 09:41
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rossler REX Trainer RX401E 13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rossler REX Trainer RX401E 13 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info