If the DJ-505 does not function in the way you expect, rst check the following points. If this does not resolve the problem, consult your dealer or a nearby
Roland service center.
ProblemItems to checkActionPage
The power does not turn on
Are the included AC adaptor and power cord correctly connected
to an outlet and to the DJ-505?
Make sure that the DJ-505’s AC adaptor is correctly connected to an AC outlet and to
the rear panel power connector, and that the adaptor itself and
AC power cord are connected correctly.
p. 10
Serato DJ does not start
Is Serato DJ installed correctly?Uninstall Serato DJ, and then reinstall it.
p. 3
If you’re using Windows, is the user account specied correctly?
Create a new user account with administrative privileges. After creating the account,
install the USB driver and Serato DJ.
The DJ-505 is not recognized
Is the USB cable connected correctly?Make sure that the USB cable is connected correctly.
Could you have connected via a USB hub?You cannot use a USB hub. Connect the DJ-505 directly to your computer via a USB cable.
Is the USB driver installed correctly?Uninstall the USB driver, and then reinstall it.
p. 3
Is Serato DJ updated to the most recent version?Use the most recent version of Serato DJ.
Jog dial does not respondCould the jog dial be dirty?
If the top surface of the jog dial is dirty or if your hand is dirty, the jog dial might not respond.
Make sure that the jog dial and your hand are clean.
No sound, or insucient volume
Are the knobs and faders that adjust the volume set correctly?
Set the [TRIM] knob, channel fader, cross fader, [TR/SAMPLER] level fader, and
[MASTER LEVEL] knob to the appropriate positions.
p. 7
Is the [CH 1] or [CH 2] switch set correctly?Set the [CH 1] or [CH 2] switch appropriately for the input source.p. 8
Are the powered speakers or amp connected correctly?Check the connections of the powered speakers or amp.p. 9
Are the connected powered speakers or amp set correctly?Check the volume settings of the powered speakers or amp.
Sound is distorted
Is the [TRIM] knob set correctly?Set the [TRIM] knob to the appropriate position.
p. 7
Is the [MASTER LEVEL] knob set correctly?
Set the [MASTER LEVEL] knob so that the red area of the MASTER level indicator does
not light.
Mic sound is not outputIs the [MIC LEVEL] knob set correctly?
Set the front panel [MIC LEVEL] knob and the rear panel [MIC SENS] knob to an
appropriate position.
p. 8, p. 9
Can’t use pitch playHave you activated Pitch‘n Time DJ?
In order to use pitch play, you must activate Pitch’n Time DJ.
Following the procedure given on the included Serato DJ EXPANSION PACK VOUCHER card,
enter the voucher code (listed on the card) and activate Pitch’n Time DJ.
Can’t use Saved FlipHave you activated Serato Flip?
In order to use Saved Flip mode, you must separately purchase the Serato Flip
Expansion Pack and activate Serato Flip.
p. 24
Can’t use DVS controlHave you activated Serato DVS Expansion?
In order to use DVS control, you must separately purchase the Serato DVS Expansion
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Roland DJ-505 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Roland DJ-505 in the language / languages: English as an attachment in your email.
The manual is 4,9 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
