708968

Roland BK-9 - Midi Implementation Manual

2
Zoom out
Zoom in
Previous page
1/26
Next page
MIDI Implementation
2
vv = Control Value: 00H-7FH (0-127),
Initial Value = 00H (0)
• Not received when MIDI “Rx” part parameters is “O”.
• Not received when the “Other CC” parameter of the MIDI “Rx Event”
group is “O”
{ Play Stability (SuperNATURAL , Controller Number 17)
Status 2nd byte 3rd byte
BnH 11H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Control Value: 00H-7FH (0-127),
Initial Value = 00H (0)
• Not received when MIDI “Rx” part parameters is “O”.
• Not received when the “Other CC” parameter of the MIDI “Rx Event”
group is “O”
{ Growl Sens (SuperNATURAL , Controller Number 18)
Status 2nd byte 3rd byte
BnH 12H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Control Value: 00H-7FH (0-127),
Initial Value = 00H (0)
• Not received when MIDI “Rx” part parameters is “O”.
• Not received when the “Other CC” parameter of the MIDI “Rx Event”
group is “O”
{ Hold 1 (Controller Number 64)
Status 2nd byte 3rd byte
BnH 40H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Control Value: 00H-7FH (0-127),
Initial Value = 00H (0)
• Not received when “Hold” RX Event is O.
• Not received when MIDI “Rx” part parameters is “O”.
{ Portamento (Controller Number 65)
Status 2nd byte 3rd byte
BnH 41H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Control Value: 00H~7FH (0~127) 0~63= OFF,
64~127=ON
• Not received when MIDI “Rx” part parameters is “O”.
• Not received when the “Other CC” parameter of the MIDI “Rx Event”
group is “O”
{ Sostenuto (Controller Number 66)
Status 2nd byte 3rd byte
BnH 42H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Control value: 00H-7FH (0-127)
0-63 = OFF, 64-127 = ON
• Not received when “Sostenuto” RX Event is O.
• Not received when MIDI “Rx” part parameters is “O”.
{ Soft (Controller Number 67)
Status 2nd byte 3rd byte
BnH 43H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Control value: 00H-7FH (0-127)
• Not received when “Soft” RX Event is O.
• Not received when MIDI “Rx” part parameters is “O”.
• Some Tones will not exhibit any change.
{ Hold 2 (Controller Number 69)
Status 2nd byte 3rd byte
BnH 45H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Control value: 00H-7FH (0-127)
• Not received when “Hold” RX Event is O.
• Not received when MIDI “Rx” part parameters is “O”.
{ Filter Resonance (Controller Number 71)
Status 2nd byte 3rd byte
BnH 47H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv= Resonance value (relative change): 00H-7FH(-64 - 0 -+63),
Initial value = 40H (no change)
• Some Tones will not exhibit any change.
• Not received when MIDI “Rx” part parameters is “O”.
• Not received when the “Other CC” parameter of the MIDI “Rx Event”
group is “O”
{ Release Time (Controller Number 72)
Status 2nd byte 3rd byte
BnH 48H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Release Time value (relative change): 00H-7FH(-64 - 0 -+63),
Initial value = 40H (no change)
• Some Tones will not exhibit any change.
• Not received when MIDI “Rx” part parameters is “O”.
• Not received when the “Other CC” parameter of the MIDI “Rx Event”
group is “O”
{ Attack Time (Controller Number 73)
Status 2nd byte 3rd byte
BnH 49H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Attack time value (relative change): 00H-7FH(-64 - 0 -+63),
Initial value=40H (no change)
• Some Tones will not exhibit any change.
• Not received when MIDI “Rx” part parameters is “O”.
• Not received when the “Other CC” parameter of the MIDI “Rx Event”
group is “O”
{ Cuto (Controller Number 74)
Status 2nd byte 3rd byte
BnH 4AH vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Cuto value (relative change): 00H-7FH(-64 - 0 - +63),
Initial value = 40H (no change)
• Some Tones will not exhibit any change.
• Not received when MIDI “Rx” part parameters is “O”.
• Not received when the “Other CC” parameter of the MIDI “Rx Event”
group is “O”
{ Decay Time (Controller Number 75)
Status 2nd byte 3rd byte
BnH 4BH vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Decay Time value (relative change): 00H-7FH(-64 - 0 -+63),
Initial value = 40H (no change)
• Some Tones will not exhibit any change.
• Not received when MIDI “Rx” part parameters is “O”.
• Not received when the “Other CC” parameter of the MIDI “Rx Event”
group is “O”
{ Vibrato Rate (Controller Number 76)
Status 2nd byte 3rd byte
BnH 4CH vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Vibrato Rate value (relative change): 00H-7FH(-64 - 0 -+63),
Initial value = 40H (no change)
• Some Tones will not exhibit any change.
• Not received when MIDI “Rx” part parameters is “O”.
• Not received when the “Other CC” parameter of the MIDI “Rx Event”
group is “O”
{ Vibrato Depth (Controller Number 77)
Status 2nd byte 3rd byte
BnH 4DH vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Vibrato Depth Value (relative change): 00H-7FH(-64 - 0 -+63),
Initial Value = 40H (no change)
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BK-9 - Midi Implementation at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-9 - Midi Implementation in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info