Manual Roland BK-9 - Midi Implementation (page 1 of 26) (English)

708968

Zoom out

Zoom in

1/26

MIDI Implementation

Model: BK-9 Date: August 30, 2013

Version: 1.00

1. Receive Data

 Channel Voice Messages

z Note o

Status 2nd byte 3rd byte

8nH kkH vvH

9nH kkH 00H

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = note o velocity: 00H-7FH (0-127)

• Not received when MIDI “Rx” part parameters is “O” (Initial value is On).

z Note on

Status 2nd byte 3rd byte

9nH kkH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = note number: : 00H-7FH (0-127)

vv = note on velocity: 01H-7FH (1-127)

• Not received when MIDI “Rx” part parameters is “O” (Initial value is On).

z Polyphonic Key Pressure

Status 2nd byte 3rd byte

AnH kkH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = key pressure: 00H-7FH (0-127)

• The resulting eect is determined by System Exclusive messages. With

the initial settings, there will be no eect.

z Control Change

• The value specied by a Control Change message will not be reset even

by a Program Change, etc.

{ Bank Select (Controller Number 0, 32)

Status 2nd byte 3rd byte

BnH 00H mmH

BnH 20H llH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

mm, ll = Bank number: 00H, 00H-7FH, 7FH (bank.1-

bank.16384),

Initial Value = 00 00H (bank.1)

• Bank Select processing will be suspended until a Program Change

message is received.

• Not received when “Program Change” Rx Event is O

• Not received when MIDI “Rx” part parameters is “O”.

{ Modulation (Controller Number 1)

Status 2nd byte 3rd byte

BnH 01H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Modulation depth: 00H-7FH (0-127)

• Not received when Rx.MODULATION= OFF (Initial value is ON).

• The resulting eect is determined by System Exclusive messages. With

the initial settings, this is Pitch Modulation Depth.

• Not received when MIDI “Rx” part parameters is “O”.

{ Portamento Time (Controller Number 5)

Status 2nd byte 3rd byte

BnH 05H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Portamento Time: 00H-7FH (0-127),

Initial value = 00H (0)

• This adjusts the rate of pitch change when Portamento is ON or when

using the Portamento Control. A value of 0 results in the fastest change.

• Not received when MIDI “Rx” part parameters is “O”.

{ Data Entry (Controller Number 6, 38)

Status 2nd byte 3rd byte

BnH 06H mmH

BnH 26H llH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

mm, ll = the value of the parameter specied by RPN/NRPN

mm = MSB, ll = LSB

• Not received when MIDI “Rx” part parameters is “O”.

{ Volume (Controller Number 7)

Status 2nd byte 3rd byte

BnH 07H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Volume: 00H-7FH (0-127),

Initial Value = 64H (100)

• Volume messages are used to adjust the volume balance of each Part.

• Not received when “Volume” RX Event is o.

• Not received when MIDI “Rx” part parameters is “O”.

•

{ Pan (Controller Number 10)

Status 2nd byte 3rd byte

BnH 0AH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = pan: 00H-40H-7FH (Left-Center-Right),

Initial Value = 40H (Center)

• Some Tones are not capable of being panned all the way to the left or

right.

• Not received when “PanPot” RX Event is O

• Not received when MIDI “Rx” part parameters is “O”.

{ Expression (Controller Number 11)

Status 2nd byte 3rd byte

BnH 0BH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Expression: 00H-7FH (0-127),

Initial Value = 7FH (127)

• This adjusts the volume of a Part. It can be used independently from

Volume messages. Expression messages are used for musical expression

within a performance; e.g., expression pedal movements, crescendo and

decrescendo.

• Not received when “Expression” RX Event is O.)

• Not received when MIDI “Rx” part parameters is “O”.

{ Noise Level (SuperNATURAL, Controller Number 16)

Status 2nd byte 3rd byte

BnH 10H vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-9 - Midi Implementation in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland BK-9 - Midi Implementation Manual

Product: