708862
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
Top Panel
1
2
3
4
5
6
7
1 PAD control
BANK [
K
] [
J
] button
Switch banks 1–8.
By holding down the [SHIFT] button and using the BANK [K] [J]
buttons, you can switch to banks 9–16.
BANK indicator
The currently selected bank is lit. White indicates banks 1–8 and red
indicates banks 9–16.
2
[SNAP SHOT] (WRITE) button
This lets you save assignments and zone settings to user memory
as a snapshot, or load them.
3
PAD [1]–[8]
Use these to transmit the assigned messages.
[PREV] (EXIT) button
Returns to the previous program change.
This is also used to cancel a setting.
[NEXT] (ENTER) button
Advances to the next program change.
This is also used to conrm a setting.
[PROG CHG] button
Makes the pads transmit program changes.
[CC] button
Makes the pads transmit control changes.
[NOTE] button
Makes the pads transmit notes.
4
[SHIFT] button
Used together with other buttons to execute various functions.
[FUNC] (ASSIGN) button
If you press this button so it’s lit, you can change the MIDI channel
or transmit a program number by pressing the appropriate keys
(p. 7).
5 Assignable control
[1]–[8] knobs
You can switch sounds by pressing these buttons.
6 Zone control
These buttons allow you to play three layered sounds
simultaneously (Layer), or to play dierent sounds in the left and
right sections of the keyboard, divided at a specied key (Split)
(p. 8).
[LOWER] [UPPER1] [UPPER2] buttons
Turn each zone on (button lit) or o (button unlit).
[SPLIT] button
When split is on (button lit), the keyboard is divided for
performance.
[S1] [S2] buttons
You can send control change messages by pressing these buttons.
Default: [S1] CC#80, [S2] CC#81
[TRANSPOSE] button
While you hold down the [TRANSPOSE] button, the OCTAVE/
TRANSPOSE indicator and OCTAVE [-] [+] button functions are
switched.
When the [TRANSPOSE] button is turned on, the transposition
setting is enabled. When the [TRANSPOSE] button is turned o, the
transposition setting is disabled.
OCTAVE [-] [+] buttons
These buttons let you shift the pitch of the keyboard up or down in
steps of one octave.
OCTAVE / TRANSPOSE indicator
Indicates the octave or transpose value.
7 Pitch Bend / Modulation
Pitch Bend / Modulation lever
Use this lever to vary the pitch or to apply vibrato.
Panel Descriptions
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland A-88MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland A-88MKII in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland A-88MKII

Roland A-88MKII Additional guide - English - 9 pages

Roland A-88MKII User Manual - German - 16 pages

Roland A-88MKII User Manual - Dutch - 16 pages

Roland A-88MKII User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info