708862

Roland A-88MKII Manual

14
Zoom out
Zoom in
Previous page
1/16
Next page
System Settings (FUNCTION)
14
Switching the Operation of the Pads
(Latch/Momentary)
* This can be specied only when the [CC] button is lit.
When you press a pad to transmit a control change message, the
setting you make here species whether the control change is on only
while you hold down the pad (momentary) or alternates on/o each
time you press the pad (latch).
1.
Press the [FUNC] button.
2.
Press the keys that have “PAD/Cc” printed above them.
3.
Use the OCTAVE [-] [+] buttons to make the setting.
Parameter Button Explanation
PAD/Cc
OCTAVE [+]
Momentary: The control change is on only
while you hold down the pad.
OCTAVE [-]
Latch (default): The control change
alternates on/o each time you press the
pad.
4.
Press the [NEXT] (ENTER) button.
Assigning a Controller Number to a Knob
1.
Hold down the [SHIFT] button and press the [FUNC] button.
The assignable pads and knobs blink.
2.
To select the controller that you want to assign, operate
that knob.
3.
Specify the controller number by pressing keys that have
“NUMERIC (0–9)” printed above them.
Range: 0–127
4.
Press the [NEXT] (ENTER) button.
Using Pedals to Modify the Sound
The A-88MKII can use the included damper pedal, a pedal unit (RPU-3:
sold separately), an expression pedal (EV-5: sold separately), or a pedal
switch (DP series: sold separately).
* In order to use an expression pedal, you must make settings in the dedicated
app.
DAMPER Hold (CC#64)
Use this pedal to sustain notes. While you hold down this pedal,
notes will sustain even if you take your ngers o the keyboard.
FC2 Sostenuto (CC#66)
Only the notes that were already played when this pedal was
pressed are sustained.
FC1 Soft pedal (CC#67)
This pedal is used to make the sound softer.
* The assigned eect diers depending on the sound module.
MEMO
Adding expression to your performance (Expression Pedal)
While playing the keyboard, raise and lower the expression pedal.
By varying the volume, you can make your performance more
expressive.
* Example: Using an expression pedal connected to the FC2 jack to adjust the
volume (expression: CC#11)
Assigning a Program Change Message to
a Pad
(PROG CHG)
1.
Press the [PROG CHG] button.
2.
Hold down the [SHIFT] button and press the [FUNC] button.
The assignable pads blink.
3.
Press the pad that you want to assign.
4.
Specify the program number by pressing keys that have
“NUMERIC (0–9)” printed above them.
Range: 0–127
5.
Press the [NEXT] (ENTER) button.
Assigning a Control Change Message to a
Pad
(CC)
1.
Press the [CC] button.
2.
Hold down the [SHIFT] button and press the [FUNC] button.
The assignable pads blink.
3.
Press the pad that you want to assign.
4.
Specify the controller number by pressing keys that have
“NUMERIC (0–9)” printed above them.
Range: 0–127
5.
Press the [NEXT] (ENTER) button.
Assigning Note Messages to Pads
(NOTE)
1.
Press the [NOTE] button.
2.
Hold down the [SHIFT] button and press the [FUNC] button.
The assignable pads blink.
3.
Press the pad that you want to assign.
4.
Press one or more keys to specify the notes.
You can specify up to four notes.
5.
Press the [NEXT] (ENTER) button.
Halting Stuck Notes
(PANIC)
If you experience “stuck notes” on the connected MIDI sound module,
or if there’s something else wrong with the sound, you can transmit
reset messages to x the problem.
1.
Press the [FUNC] button.
2.
Press the keys that have “PANIC” printed above them.
The reset messages (All Sounds O, All Notes O, and Reset All
Controller) are transmitted on all channels.
… 14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland A-88MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland A-88MKII in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland A-88MKII

Roland A-88MKII Additional guide - English - 9 pages

Roland A-88MKII User Manual - German - 16 pages

Roland A-88MKII User Manual - Dutch - 16 pages

Roland A-88MKII User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info