Zoom out
Zoom in
Previous page
1/64
Next page
For safe and correct use, be sure to read "Safety Information"
before using the machine.
Appendix
Troubleshooting
Maintaining the Machine
Configuring the Machine Using Smart
Organizing Monitor
Printing Documents
Loading Paper
Guide to the Machine
User Guide
1


Need help? Post your question in this forum.

Forumrules


Content of pages


  • Page 1

    User Guide

    Guide to the Machine
    Loading Paper
    Printing Documents
    Configuring the Machine Using Smart
    Organizing Monitor
    Maintaining the Machine
    Troubleshooting
    Appendix

    For safe and correct use, be sure to read "Safety Information"
    before using the machine.



  • Page 2



  • Page 3

    TABLE OF CONTENTS
    How to Read This Manual.................................................................................................................................4
    Introduction.....................................................................................................................................................4
    Legal Prohibition.............................................................................................................................................4
    Disclaimer........................................................................................................................................................4
    Model Names................................................................................................................................................4
    Model-Specific Information...............................................................................................................................6
    Important Safety Instructions

    .........................................................................................................7

    User Information on Electrical & Electronic Equipment...............................................................................7
    Environmental Advice for Users....................................................................................................................8
    Note for the Battery and/or Accumulator Symbol (For EU countries only)..............................................9
    Important Safety Instructions

    .......................................................................................................10

    Notes to Users in the State of California....................................................................................................10

    1. Guide to the Machine
    Guide to Components......................................................................................................................................11
    Exterior..........................................................................................................................................................11
    Interior...........................................................................................................................................................12
    Installing the Driver and Software...................................................................................................................13
    Quick Install..................................................................................................................................................13
    Installing the Printer Driver...........................................................................................................................13
    Upgrading or Deleting the Printer Driver...................................................................................................13
    What is Smart Organizing Monitor?..............................................................................................................16

    2. Loading Paper
    Supported Paper..............................................................................................................................................17
    Non-Recommended Paper Types...................................................................................................................18
    Print Area..........................................................................................................................................................19
    Loading Paper..................................................................................................................................................20
    Specifying Paper Type and Paper Size Using Smart Organizing Monitor.............................................22

    3. Printing Documents
    Basic Operation...............................................................................................................................................25
    Printing on Both Sides of Sheets..................................................................................................................26
    Canceling a Print Job...................................................................................................................................27
    If a Paper Mismatch Occurs............................................................................................................................28
    Continuing Printing Using Mismatched Paper...........................................................................................28
    1



  • Page 4

    Resetting the Print Job..................................................................................................................................28
    Preventing Paper Mismatch Errors..............................................................................................................28

    4. Configuring the Machine Using Smart Organizing Monitor
    Checking the System Information....................................................................................................................31
    Checking the Status Information.................................................................................................................31
    Printing the Configuration Page or Test Page............................................................................................32
    Configuring the Machine Settings...................................................................................................................33
    Tab Settings..................................................................................................................................................33
    Updating the Firmware....................................................................................................................................34

    5. Maintaining the Machine
    Replacing the Print Cartridge..........................................................................................................................35
    Cautions When Cleaning................................................................................................................................37
    Cleaning the Inside of the Machine................................................................................................................38

    6. Troubleshooting
    Common Problems...........................................................................................................................................39
    Paper Feed Problems.......................................................................................................................................40
    Removing Printing Jams...............................................................................................................................41
    Print Quality Problems......................................................................................................................................45
    Checking the Condition of the Machine....................................................................................................45
    Printer Problems................................................................................................................................................46
    Print Positions Do Not Match Display Positions.........................................................................................47
    Error and Status Messages Appear on the Smart Organizing Monitor......................................................48

    7. Appendix
    Notes About the Toner.....................................................................................................................................51
    Moving and Transporting the Machine..........................................................................................................52
    Disposal........................................................................................................................................................52
    Where to Inquire..........................................................................................................................................52
    Consumables....................................................................................................................................................53
    Print Cartridge..............................................................................................................................................53
    Specifications of the Machine.........................................................................................................................54
    General Function Specifications.................................................................................................................54
    Printer Function Specifications....................................................................................................................55
    Trademarks.......................................................................................................................................................56
    2



  • Page 5

    INDEX.............................................................................................................................................................59

    3



  • Page 6

    How to Read This Manual
    Introduction
    This manual contains detailed instructions and notes on the operation and use of this machine. For your
    safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
    place for quick reference.

    Legal Prohibition
    Do not copy or print any item for which reproduction is prohibited by law.
    Copying or printing the following items is generally prohibited by local law:
    bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
    The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
    completeness or accuracy. If you have any questions concerning the legality of copying or printing
    certain items, consult with your legal advisor.

    Disclaimer
    Contents of this manual are subject to change without prior notice.
    To the maximum extent permitted by applicable laws, in no event will the manufacturer be liable for any
    damages whatsoever arising out of failures of this machine, losses of the registered data, or the use or
    non-use of this product and operation manuals provided with it.
    Make sure that you always copy or have backups of the data registered in this machine. Documents or
    data might be erased due to your operational errors or malfunctions of the machine.
    In no event will the manufacturer be responsible for any documents created by you using this machine or
    any results from the data executed by you.
    For good output quality, the manufacturer recommends that you use genuine toner from the
    manufacturer.
    Two kinds of size notation are employed in this manual.
    Some illustrations or explanations in this guide may differ from your product due to improvement or
    change in the product.

    Model Names
    SP 110: Type 1

    4



  • Page 7

    SP 111: Type 2

    5



  • Page 8

    Model-Specific Information
    This section explains how you can identify the region your machine belongs to.
    There is a label on the rear of the machine, located in the position shown below. The label contains
    details that identify the region your machine belongs to. Read the label.

    CXP042

    The following information is region-specific. Read the information under the symbol that corresponds to
    the region of your machine.
    (mainly Europe and Asia)
    If the label contains the following, your machine is a region A model:
    • CODE XXXX -27, -29
    • 220-240V
    (mainly North America)
    If the label contains the following, your machine is a region B model:
    • CODE XXXX -17
    • 120V
    • Dimensions in this manual are given in two units of measure: metric and inch. If your machine is a
    Region A model, refer to the metric units. If your machine is a Region B model, refer to the inch
    units.

    6



  • Page 9

    Important Safety Instructions
    User Information on Electrical & Electronic Equipment
    Users in the countries where this symbol shown in this section has been specified in
    national law on collection and treatment of E-waste
    Our Products contain high quality components and are designed to facilitate recycling.
    Our products or product packaging are marked with the symbol below.

    The symbol indicates that the product must not be treated as municipal waste. It must be disposed of
    separately via the appropriate return and collection systems available. By following these instructions
    you ensure that this product is treated correctly and help to reduce potential impacts on the environment
    and human health, which could otherwise result from inappropriate handling. Recycling of products
    helps to conserve natural resources and protect the environment.
    For more detailed information on collection and recycling systems for this product, please contact the
    shop where you purchased it, your local dealer or sales/service representatives.

    All Other Users
    If you wish to discard this product, please contact your local authorities, the shop where you bought this
    product, your local dealer or sales/service representatives.

    For Users in India
    This product complies with the "India E-waste Rule 2011" and prohibits use of lead, mercury,
    hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations
    exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2
    of the Rule.

    7



  • Page 10

    Environmental Advice for Users
    Users in the EU, Switzerland and Norway
    Consumables yield
    Please refer to either the User’s Manual for this information or the packaging of the consumable.
    Recycled paper
    The machine can use recycled paper which is produced in accordance with European standard
    EN 12281:2002 or DIN 19309. For products using EP printing technology, the machine can print
    on 64g/m2 paper, which contains less raw materials and represents a significant resource
    reduction.
    Duplex printing (if applicable)
    Duplex printing enables both sides of a sheet of paper to be used. This saves paper and reduces
    the size of printed documents so that fewer sheets are used. We recommend that this feature is
    enabled whenever you print.
    Toner and ink cartridge return program
    Toner and ink cartridge for recycling will be accepted free of charge from users in accordance with
    local regulations.
    For details about the return program, please refer to the Web page below or consult your service
    person.
    https://www.ricoh-return.com/
    Energy efficiency
    The amount of electricity a machine consumes depends as much on its specifications as it does on
    the way you use it. The machine is designed to allow you to reduce electricity costs by switching to
    Ready mode after it prints the last page. If required, it can immediately print again from this mode.
    If no additional prints are required and a specified period of time passes, the device switches to an
    energy saving mode.
    In these modes, the machine consumes less power (watts). If the machine is to print again, it needs
    a little longer to return from an energy saving mode than from Ready mode.
    For maximum energy savings, we recommend that the default setting for power management is
    used.
    Products that comply with the Energy Star requirement are always energy efficient.

    8



  • Page 11

    Note for the Battery and/or Accumulator Symbol (For EU countries only)

    In accordance with the Battery Directive 2006/66/EC Article 20 Information for end-users Annex II,
    the above symbol is printed on batteries and accumulators.
    This symbol means that in the European Union, used batteries and accumulators should be disposed of
    separately from your household waste.
    In the EU, there are separate collection systems for not only used electrical and electronic products but
    also batteries and accumulators.
    Please dispose of them correctly at your local community waste collection/recycling centre.

    9



  • Page 12

    Important Safety Instructions
    Notes to Users in the State of California
    Perchlorate Material - special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/
    perchlorate

    10



  • Page 13

    1. Guide to the Machine
    Guide to Components
    This section introduces the names of the various parts on the front and rear side of the machine and
    outlines their functions.

    Exterior

    1

    7

    8

    2

    3

    9

    4

    5

    6

    10

    11

    12 13
    CXP003

    1. Maintenance Cover
    Lift up this cover to replace consumables or clear a paper jam.
    2. Input Tray
    This tray can hold up to 50 sheets of plain paper.
    3. Power Indicator
    This indicator lights up blue when the machine is turned on. It flashes when a print job is received and while
    printing is in progress.
    4. [Start] key
    Press this key to resume printing if printing stops due to paper running out or a paper settings error.
    You can also press this key to print a test page.
    5. [Job Reset] key
    Press this key to cancel an ongoing print job.

    11



  • Page 14

    1. Guide to the Machine

    6. Alert Indicator
    This indicator lights up red when the machine runs out of paper or consumables, when the paper settings do
    not match the settings specified by the driver, or when other errors occur.
    7. Tray Extension
    Pull out and extend this tray extension to hold the output paper.
    8. Fusing Pressure Release Lever
    If paper is jammed, lower the lever on the left end, and then remove the paper.
    9. Front Cover
    Open this cover to pull out the output tray before printing.
    10. USB Port
    Use this port to connect the machine to a computer using a USB cable.
    11. Input Tray Cover
    Set this cover up and pull out the paper source tray to load paper.
    12. Power Connector
    Connect the power cord to the machine here. Insert the other end of the cable into a nearby wall outlet.
    13. Power Switch
    Use this switch to turn the power on or off.

    Interior

    1
    CXP043

    1. Print Cartridge
    A replacement consumable that is required to make prints on paper. For details about replacing the cartridge,
    see page 35 "Replacing the Print Cartridge".

    12



  • Page 15

    Installing the Driver and Software

    Installing the Driver and Software
    You can install the necessary driver for this machine using the included CD-ROM.
    The operating systems compatible with the drivers and software for this machine are: Windows XP/
    Vista/7/8 and Windows Server 2003/2003 R2/2008/2008 R2/2012.
    The procedure in this section is an example based on Windows 7. The actual procedure may vary
    depending on the operating system you are using.
    • Be sure to disconnect the USB cable from the machine and turn the machine off before beginning
    the installation.

    Quick Install
    Use Quick Install to install the printer driver and Smart Organizing Monitor from the CD-ROM.
    1. Close all applications except this manual.
    2. Insert the CD-ROM into the CD-ROM drive.
    3. Select a language for the interface, and then click [OK].
    4. From the CD-ROM menu, click [USB Quick Install].
    5. Follow the instructions in the installation wizard.

    Installing the Printer Driver
    1. Close all applications except this manual.
    2. Insert the CD-ROM into the CD-ROM drive.
    3. Select a language for the interface, and then click [OK].
    4. From the CD-ROM menu, click [DDST Printer Driver].
    5. Follow the instructions in the installation wizard.

    Upgrading or Deleting the Printer Driver
    Upgrading the printer driver
    1. On the [Start] menu, click [Devices and Printers].
    • Windows XP, Windows Server 2003/2003 R2:

    13



  • Page 16

    1. Guide to the Machine

    On the [Start] menu, select [Printers and Faxes].
    • Windows Vista, Windows Server 2008:
    On the [Start] menu, select [Control Panel], and then click [Printers] in [Hardware and Sound]
    category.
    • Windows 8, Windows Server 2012:
    Click [Search] on the Charm Bar, and then click [Control Panel]. When the [Control Panel]
    window appears, click [View devices and printers].
    2. Right-click the icon of the printer model you want to modify, and then click [Printer
    properties].
    3. Click the [Advanced] tab.
    4. Click [New Driver...], and then click [Next].
    5. Click [Have Disk...].
    6. Click [Browse...], and then select the printer driver location.
    7. Click [OK], and then specify the printer model.
    8. Click [Next].
    9. Click [Finish].
    10. Click [OK] to close the printer properties window.
    11. Restart the computer.

    Deleting the printer driver
    1. On the [Start] menu, click [Devices and Printers].
    • Windows XP, Windows Server 2003/2003 R2:
    On the [Start] menu, select [Printers and Faxes].
    • Windows Vista, Windows Server 2008:
    On the [Start] menu, select [Control Panel], and then click [Printers] in [Hardware and Sound]
    category.
    • Windows 8, Windows Server 2012:
    Click [Search] on the Charm Bar, and then click [Control Panel]. When the [Control Panel]
    window appears, click [View devices and printers].
    2. Right-click the icon of the printer you want to delete, and then click [Remove device].
    • Windows XP/Vista, Windows Server 2003/2003 R2/2008
    Right-click the icon of the machine you want to delete, and then click [Delete].
    3. Click [Yes].
    4. Click any printer icon, and then click [Print server properties].
    14



  • Page 17

    Installing the Driver and Software

    5. Click the [Drivers] tab.
    6. Click the [Change Driver Settings] button if it is displayed.
    7. Click [Remove...].
    8. Select [Remove driver and driver package.], and then click [OK].
    9. Click [Yes].
    10. Click [Delete].
    11. Click [OK].
    12. Click [Close] to close the print server properties window.

    15



  • Page 18

    1. Guide to the Machine

    What is Smart Organizing Monitor?
    Install this utility on your computer from the included CD-ROM before using it.
    Smart Organizing Monitor provides the following functions:
    • Displays the status of the machine
    Displays paper jam messages and other error messages.
    • Paper size and type settings
    Displays the settings for paper sizes or types available on this machine.
    • Print test and configuration pages
    Prints List/Report to check the list of settings for this machine and other information.
    • Modify the system settings
    Use to change custom paper size settings and other settings on this machine.
    • Modify the printer settings
    Use to change this machine's print settings such as [Auto Continue:] and [I/O Time Out:].
    For details about basic instructions on how to use Smart Organizing Monitor, see page 31
    "Configuring the Machine Using Smart Organizing Monitor".

    16



  • Page 19

    2. Loading Paper
    Supported Paper
    Paper Size
    • A4
    • 81/2 " × 11 " (Letter)
    • 81/2 " × 14 " (Legal)
    • B5
    • 51/2 " × 81/2 " (Half Letter)
    • 71/4 " × 101/2 " (Executive)
    • A5
    • A6
    • B6
    • 16K (197 × 273 mm)
    • 16K (195 × 270 mm)
    • 16K (184 × 260 mm)
    • 8 " × 13 " (F/GL)
    • 81/2 " × 13 " (Foolscap)
    • 81/4 " × 13 " (Folio)
    • Custom Paper Size
    The following paper sizes are supported as custom paper sizes:
    • Approximately 90-216 mm (3.6-8.5 inches) in width
    • Approximately 148-356 mm (5.8-14 inches) in length
    Paper Type
    • Plain Paper (65-99 g/m2 (17-26 lb.))
    • Recycled Paper (75-90 g/m2 (20-24 lb.))
    • Thin Paper (52-64 g/m2 (14-17 lb.))
    • Thick Paper (100-130 g/m2 (26.6-34 lb.))
    Paper Capacity
    50 sheets
    (70 g/m2, 19 lb.)

    17



  • Page 20

    2. Loading Paper

    Non-Recommended Paper Types
    Do not use the following types of paper:
    • Ink-jet printer paper
    • GelJet special paper
    • Bent, folded, or creased paper
    • Curled or twisted paper
    • Wrinkled paper
    • Damp paper
    • Dirty or damaged paper
    • Paper that is dry enough to emit static electricity
    • Paper that has already been printed onto, except a preprinted letterhead paper.
    Malfunctions are especially likely when using paper printed on by other than a laser printer
    (e.g.monochrome and color copiers, ink-jet printers, etc.)
    • Special paper, such as thermal paper and carbon paper
    • Paper weighing heavier or lighter than the limit
    • Paper with windows, holes, perforations, cutouts, or embossing
    • Adhesive label paper on which glue or base paper is exposed
    • Paper with clips or staples
    • When loading paper, take care not to touch the surface of the paper.
    • Even if paper is adequate for the machine, poorly stored paper can cause paper misfeeds, print
    quality degradation, or malfunctions.

    18



  • Page 21

    Print Area

    Print Area
    The diagram below shows the area of the paper that the machine can print on.
    From the printer driver
    4

    4
    3

    1

    3

    2
    CHZ904

    1. Print area
    2. Feed direction
    3. Approx. 4.2 mm (0.2 inches)
    4. Approx. 4.2 mm (0.2 inches)

    • The print area may vary depending on the paper size and printer driver settings.
    • To adjust the print position, specify [Registration] on the [System] tab in Smart Organizing
    Monitor.

    19



  • Page 22

    2. Loading Paper

    Loading Paper
    Load a stack of paper for printing in the input tray on the back of the machine.
    • When loading paper, be sure to configure the size and type of paper. When printing a document,
    specify the paper size and type in the printer driver so that the settings configured when paper is
    loaded can be used for printing.
    1. Open the input tray cover and pull out the tray.

    2

    1

    CXP044

    2. After pulling out the tray, tilt it back and forth, and then attach the end of the input tray to
    the machine.
    1

    2

    CXP004

    20



  • Page 23

    Loading Paper

    3. Raise up the paper support wire.

    CXP045

    4. Fan the paper before loading it in the tray.

    CBK254

    5. Slide the paper guide on both sides outward, and then load the paper print side up until it
    stops.

    2
    1

    1
    CXP005

    21



  • Page 24

    2. Loading Paper

    6. Adjust the paper guide on both sides to fit the paper width.

    CXP006

    7. Open the front cover and tray extension.

    CXP046

    Specifying Paper Type and Paper Size Using Smart Organizing Monitor
    The procedure in this section is an example based on Windows 7. The actual procedure may vary
    depending on the operating system you are using.

    Specifying the paper type and paper size
    1. On the [Start] menu, click [All Programs].
    2. Click [Smart Organizing Monitor for SP xxx Series].
    3. Click [Smart Organizing Monitor for SP xxx Series Status].
    4. If the machine you are using is not selected, click [Select Device...], and then select the
    machine's model.
    5. Click [OK].
    6. On the [Status] tab, click [Change...].
    7. Select the paper type and paper size, and then click [OK].

    22



  • Page 25

    Loading Paper

    8. Click [Close].

    Changing the custom paper size
    1. On the [Start] menu, click [All Programs].
    2. Click [Smart Organizing Monitor for SP xxx Series].
    3. Click [Smart Organizing Monitor for SP xxx Series Status].
    4. If the machine you are using is not selected, click [Select Device...], and then select the
    machine's model.
    5. Click [OK].
    6. On the [User Tool] tab, click [Printer Configuration].
    7. On the [System] tab, select [mm] or [inch] in the [Measurement Unit:] list.
    8. In the [Horizontal: (90 to 216 mm)] box, enter the width.
    9. In the [Vertical: (148 to 356 mm)] box, enter the length.
    10. Click [OK].
    11. Click [Close].

    23



  • Page 26

    2. Loading Paper

    24



  • Page 27

    3. Printing Documents
    Basic Operation
    Use the printer driver to print a document from your computer.
    • Before printing, check that the paper size specified in [Document Size:] on the [Paper/Print
    Quality] tab matches the size of the paper in the paper tray.
    1. After creating a document, open the [Printing Preferences] dialog box in the document's
    native application.

    2. Change any print settings if necessary.
    The following print settings can be specified using the printer driver:
    • Printing multiple pages on a sheet
    • Splitting a single page across multiple sheets
    • Printing on both sides of sheets
    • Not having blank pages printed
    • Having prints sorted
    • Saving printer driver settings as a file
    • Recalling and deleting saved printer properties settings
    • Printing on a custom size paper
    • Printing a large paper size document on smaller size paper
    • Reducing and enlarging a document size
    • Changing the print resolution
    • Saving on toner when printing

    25



  • Page 28

    3. Printing Documents

    • Changing the dithering pattern
    • Having text stamped on prints
    For details about each setting items, click [Help].
    3. When setting changes are completed, click [OK].
    4. Print the document using the print function in the document's native application.
    • If a paper jam occurs, printing stops halfway. Open the maintenance cover to remove the jammed
    paper. Printing will resume automatically after the maintenance cover is closed. If the maintenance
    cover is not opened to remove jammed paper, press the [Start] key to resume printing.
    • If the paper runs out, replenish it, and then press the [Start] key to resume printing.

    Printing on Both Sides of Sheets
    1. After creating a document, open the [Printing Preferences] dialog box in the document's
    native application.
    2. On the [Setup] tab, in the [Duplex:] list box, select how you want to open the bound
    output.
    3. After making any additional settings, click [OK].
    4. Start printing.
    The machine prints only the one sides of pages first, and then displays on Smart Organizing
    Monitor screen a message to reload the outputs turned over.
    5. Take out all of the prints from the output tray and place them in the input tray.
    To print on the reverse side of the prints, turn them over so that the blank side faces up and place
    them in the input tray.
    Portrait

    CXP018

    26



  • Page 29

    Basic Operation

    Landscape

    CXP019

    6. Press the [Start] key.

    Canceling a Print Job
    You can cancel print jobs using either the machine's control panel or your computer, depending on the
    status of the job.

    Canceling a print job before printing has started
    1. Double-click the printer icon on the task tray of your computer.
    2. Select the print job you want to cancel, click the [Document] menu, and then click
    [Cancel].
    • If you cancel a print job that has already been processed, printing may continue for a few pages
    before being canceled.
    • It may take a while to cancel a large print job.

    Canceling a print job while printing
    1. Press the [Job Reset] key.

    27



  • Page 30

    3. Printing Documents

    If a Paper Mismatch Occurs
    If the paper size or type does not match the print job's settings, the machine reports an error. There are
    two ways to resolve this error:
    • If [Auto Continue:] is set to [0 sec], the machine continues printing and does not display the error
    message.
    Continue printing using mismatched paper
    Use the form-feed function to ignore the error and print using mismatched paper.
    Reset the print job
    Cancel printing.

    Continuing Printing Using Mismatched Paper
    If the paper is too small for the print job, the printed image will be cropped.
    1. If the error message is displayed on Smart Organizing Monitor, press the [Start] key.
    • If the error message appears again, check whether the specified paper size matches the size of the
    paper in the paper tray.

    Resetting the Print Job
    1. If the error message is displayed on Smart Organizing Monitor, press the [Job Reset] key.

    Preventing Paper Mismatch Errors
    To prevent paper mismatch errors, use the following procedure to check that the print settings are
    properly configured:
    1. Specify the same paper size in both the application and the printer driver.
    Application (e.g., WordPad): Click [Page Setup] on the [File] menu.

    28



  • Page 31

    If a Paper Mismatch Occurs

    Printer driver (Printer Preferences dialog box): Click the [Paper/Print Quality] tab.

    2. If the error persists even after you have performed Step 1, check that the paper size
    setting specified in the printer driver matches the size of paper you are using.
    Smart Organizing Monitor: On the [Status] tab, click [Change...].

    • If [Sub Paper Size:] is enabled, the machine treats A4 and Letter-size paper as being equivalent
    and will not report a paper size mismatch between them.

    29



  • Page 32

    3. Printing Documents

    30



  • Page 33

    4. Configuring the Machine Using
    Smart Organizing Monitor
    Checking the System Information
    The state and status information of the machine can be checked using Smart Organizing Monitor.

    Checking the Status Information

    1

    3
    4

    2

    CXP110

    1. Image area
    Displays the status of this machine with an icon.
    2. Status area
    • Paper Size
    Displays the paper size configured on the machine.
    • Paper Type
    Displays the paper type configured on the machine.
    • Toner
    "**" is always displayed because the machine does not monitor the toner level.
    • Counter
    Displays the number of pages that have been printed by the machine.

    31



  • Page 34

    4. Configuring the Machine Using Smart Organizing Monitor

    3. Select Device area
    Displays the name of the selected model.
    4. Message area
    Displays the status of this machine with a message.
    For details about error messages, see page 48 "Error and Status Messages Appear on the Smart
    Organizing Monitor".

    Printing the Configuration Page or Test Page

    • When printing the test page, set the paper size to A4 or Letter. When printing other reports, set the
    paper size to A4, Letter, F/GL, Foolscap, Folio, or Legal.
    1. On the [Start] menu, click [All Programs].
    2. Click [Smart Organizing Monitor for SP xxx Series].
    3. Click [Smart Organizing Monitor for SP xxx Series Status].
    4. If the machine you are using is not selected, click [Select Device...], and then select the
    machine's model.
    5. Click [OK].
    6. On the [User Tool] tab, select [Test Page] or [Configuration Page] in the [List / Test:] list.
    7. Click [Print].

    32



  • Page 35

    Configuring the Machine Settings

    Configuring the Machine Settings
    Smart Organizing Monitor is used to modify the machine’s settings.
    1. On the [Start] menu, click [All Programs].
    2. Click [Smart Organizing Monitor for SP xxx Series].
    3. Click [Smart Organizing Monitor for SP xxx Series Status].
    4. If the machine you are using is not selected, click [Select Device...], and then select the
    machine's model.
    5. Click [OK].
    6. On the [User Tool] tab, click [Printer Configuration].
    7. Change the settings if necessary.
    8. Click [OK].
    9. Click [Close].

    Tab Settings
    This section provides a tab-by-tab overview of the machine settings that can be modified using Smart
    Organizing Monitor. For more information on each setting item, see the Smart Organizing Monitor
    Help.
    System tab
    • Register custom paper sizes.
    • Adjust the printing position or density to improve the printing quality when printed results are
    not satisfactory.
    • Enable or disable Energy Saver Mode, and specify the amount of time that will elapse before
    switching to it.
    • Update the machine firmware.
    Printer tab
    • Configure how the machine behaves when there is an inconsistency in paper size and/or
    type settings between the machine and the printer driver.
    • Specify the period of time the machine waits if it fails to receive a print job.

    33



  • Page 36

    4. Configuring the Machine Using Smart Organizing Monitor

    Updating the Firmware
    • To the maximum extent permitted by applicable laws, in no event will the manufacturer be liable for
    any damages whatsoever arising out of failures of this software, losses of documents or data, or the
    use or non-use of this software and operation manuals provided with it.
    • The company shall also not be held liable for any disputes between the customer and third parties
    resulting from any use or loss of use of this software.
    • To make sure that a firmware update has successfully completed, print the configuration page
    before and after the update.
    • Make sure to never disconnect the USB cable during a firmware update.
    • Disconnect any unnecessary cables from the machine when running a firmware update.
    • If necessary, modify power management settings on your computer in advance so that the
    computer will not enter standby or sleep mode when during a firmware update.
    • Download the firmware from the manufacturer's Web site.
    To update the firmware, use the Smart Organizing Monitor from Windows.
    1. On the [Start] menu, click [All Programs].
    2. Click [Smart Organizing Monitor for SP xxx Series].
    3. Click [Smart Organizing Monitor for SP xxx Series Status].
    4. If the machine you are using is not selected, click [Select Device...], and then select the
    machine's model.
    5. Click [OK].
    6. On the [User Tool] tab, click [Printer Configuration].
    7. On the [System] tab, click [Printer Firmware Update...].
    8. Click [OK].
    9. Specify the location of the DWN file, and then click [Open].
    10. After a message is displayed on the Smart Organizing Monitor to indicate that the
    firmware update has completed, turn the machine's power Off and then On again.

    34



  • Page 37

    5. Maintaining the Machine
    Replacing the Print Cartridge
    • This machine does not monitor the remaining toner level, and no message will be displayed to
    prompt the user to replace the print cartridge if the machine runs out of toner. Replace the print
    cartridge if the printed image suddenly becomes pale or blurred.
    • Store print cartridges in a cool dark place.
    • Actual printable numbers vary depending on image volume and density, number of pages printed
    at a time, paper type and size, and environmental conditions such as temperature and humidity.
    Toner quality degrades over time.
    • For good print quality, the manufacturer recommends that you use genuine toner from the
    manufacturer.
    • The manufacturer shall not be responsible for any damage or expense that might result from the use
    of parts other than genuine parts from the manufacturer with your office products.
    1. Open the maintenance cover.
    2. Hold the grips of the print cartridge, and then pull it out of the machine.

    CXP007

    3. Take the new print cartridge out of the box, and then take it out of the bag.
    4. Hold the print cartridge and shake it from side to side five or six times.
    Shake the print cartridge horizontally in the direction. The first few printed pages may appear
    blurred or smeared if the cartridge has not been shaken properly.

    35



  • Page 38

    5. Maintaining the Machine

    5. Hold the grips of the print cartridge, and then insert it into the machine until it stops.

    CXP008

    6. Close the maintenance cover.

    36



  • Page 39

    Cautions When Cleaning

    Cautions When Cleaning
    Clean the machine periodically to maintain high print quality.
    Dry wipe the exterior with a soft cloth. If dry wiping is not sufficient, wipe with a soft, damp cloth that has
    been wrung out thoroughly. If you still cannot remove the stain or grime, use a neutral detergent, wipe
    over the area with a thoroughly-wrung damp cloth, and then dry wipe the area and allow it to dry.
    • To avoid deformation, discoloration, or cracking, do not use volatile chemicals, such as benzine
    and thinner, or spray insecticide on the machine.
    • If there is dust or grime inside the machine, wipe with a clean, dry cloth.
    • You must disconnect the plug from the wall outlet at least once a year. Clean away any dust and
    grime from the plug and outlet before reconnecting. Accumulated dust and grime pose a fire
    hazard.
    • Do not allow paper clips, staples, or other small objects to fall inside the machine.

    37



  • Page 40

    5. Maintaining the Machine

    Cleaning the Inside of the Machine
    1. Open the maintenance cover.
    2. Hold the grips of the print cartridge, and then pull it out of the machine.

    CXP007

    3. Use a cloth to wipe the inside of the machine toward and away from yourself.

    CXP032

    Wipe carefully so as not to touch any protrusions inside the machine.
    4. Hold the grips of the print cartridge, and then insert it into the machine until it stops.

    CXP008

    5. Close the maintenance cover.

    38



  • Page 41

    6. Troubleshooting
    Common Problems
    This section describes how to troubleshoot common problems that may occur while operating the
    machine.
    Problem
    The machine does not turn on.

    Possible cause
    The power cord is not
    connected properly.

    Solution
    • Make sure that the power
    plug is firmly inserted into
    the wall outlet.
    • Make sure that the wall
    outlet is not defective by
    connecting another
    working device.

    Pages are not printed.

    The USB cable is not connected
    correctly.

    Reconnect the USB cable.

    Strange noise is heard.

    The consumable is not properly
    installed.

    Confirm that the consumable is
    properly installed.

    • If any of these problems persist, turn off the power, pull out the power cord, and contact your sales
    or service representative.

    39



  • Page 42

    6. Troubleshooting

    Paper Feed Problems
    If the machine is operating but paper will not feed or paper jams occur frequently, check the condition of
    the machine and paper.
    Problem
    Paper does not feed smoothly.

    Solution
    • Use supported types of paper. See page 17 "Supported
    Paper".
    • Load paper correctly, making sure that the paper guides
    are properly adjusted. See page 20 "Loading Paper".
    • If the paper is curled, straighten the paper.
    • Take out the paper from tray and fan it well. Then,
    reverse the top and bottom of the paper, and put it in the
    tray.

    Paper jams occur frequently.

    • If there are gaps between the paper and the paper
    guides, adjust the paper guides to remove the gaps.
    • Avoid printing on both sides of paper when printing
    images that contain large areas of solid color, which
    consume a lot of toner.
    • Use supported types of paper. See page 17 "Supported
    Paper".
    • Load paper only as high as the upper limit markings on
    the paper guide.

    Multiple sheets of paper are fed at
    one time.

    • Fan the paper well before loading. Also make sure that
    the edges are even by tapping the stack on a flat surface
    such as a desk.
    • Make sure that the paper guides are in the right position.
    • Use supported types of paper. See page 17 "Supported
    Paper".
    • Load paper only as high as the upper limit markings on
    the paper guide.
    • Check that paper was not added while there was still
    some left in the tray.
    Only add paper when there is none left in the tray.

    40



  • Page 43

    Paper Feed Problems

    Problem
    Paper gets wrinkles.

    Solution
    • Paper is damp. Use paper that has been stored properly.
    • Paper is too thin. See page 17 "Supported Paper".
    • If there are gaps between the paper and the paper
    guides, adjust the paper guides to remove the gaps.

    The printed paper is curled.

    • Load the paper upside down in the paper tray.
    • Paper is damp. Use paper that has been stored properly.

    Images are printed diagonally to the
    pages.

    If there are gaps between the paper and the paper guides,
    adjust the paper guides to remove the gaps.

    CER091

    Removing Printing Jams
    First, try removing the paper automatically. If this fails, remove it manually.
    • Jammed paper may be covered in toner. Be careful not to get toner on your hands or clothes.
    • Toner on prints made immediately after clearing a paper jam may be insufficiently fused and can
    smudge. Make test prints until smudges no longer appear.
    • Do not forcefully remove jammed paper, as it may tear. Torn pieces remaining inside the machine
    will cause further jams and possibly damage the machine.
    • Paper jams can cause pages to be lost. Check your print job for missing pages and reprint any
    pages that did not print out.

    Automatically removing the paper jammed inside the machine
    1. Open and close the maintenance cover once.
    The machine will then slowly eject the jammed paper. After the jammed paper is ejected, remove it.

    41



  • Page 44

    6. Troubleshooting

    CXP030

    If the jammed paper is not ejected, open the maintenance cover again and remove jammed paper
    manually.

    Removing paper manually

    • Since the temperature around the guide is high, wait for it to cool before checking for jammed
    paper.
    • After removing the paper, be sure to return the fusing pressure release lever to its original position.
    • Be sure not to print with the fusing pressure release lever down.
    1. Pull out the jammed paper carefully.

    CXP010

    If you cannot find the misfed paper, look inside the machine.
    2. Open the maintenance cover.

    42



  • Page 45

    Paper Feed Problems

    3. Hold the grips of the print cartridge, and then pull it out of the machine.

    CXP007

    4. Push the Fusing Pressure Release Lever on the left down with your thumbs.

    CXP014

    5. Pull out the misfed paper by holding both sides of paper. Be careful not to get toner dust
    on your hands or clothes.

    CXP011

    43



  • Page 46

    6. Troubleshooting

    CXP012

    6. If it is difficult to remove the jammed paper out of the main unit, remove the jammed
    paper from the output tray side.

    CXP013

    7. Hold the grips of the print cartridge, and then insert it into the machine until it stops.

    CXP008

    8. Push the Fusing Pressure Release Lever on the left up with your thumbs.
    9. Close the maintenance cover.

    44



  • Page 47

    Print Quality Problems

    Print Quality Problems
    Checking the Condition of the Machine
    If there is a problem with the quality of printing, first check the condition of the machine.
    Possible Cause

    Solution

    There is a problem with the
    machine's location.

    Make sure that the machine is on a level surface. Place the
    machine where it will not be subject to vibration or shock.

    Unsupported types of paper is used.

    Make sure that the paper being used is supported by the
    machine. See page 17 "Supported Paper".

    The paper type setting is incorrect.

    Make sure that the paper type setting of the printer driver
    matches the type of paper loaded. See page 17 "Supported
    Paper".

    A non-genuine print cartridges is
    being used.

    Non-genuine print cartridges reduce print quality and can
    cause malfunctions. Use genuine print cartridges only. See
    page 53 "Consumables".

    An old print cartridges is being used.

    Print cartridges should be opened before their expiration date
    and used within six months of being opened.

    The machine is dirty.

    See page 35 "Maintaining the Machine", and clean the
    machine as required.

    45



  • Page 48

    6. Troubleshooting

    Printer Problems
    Problem
    An error occurs.

    Solution
    If an error occurs when printing, change the computer or
    printer driver settings.
    • Check the printer icon name does not exceed 32
    alphanumeric characters. If it does, shorten it.
    • Check whether other applications are operating.
    Close any other applications, as they may be interfering
    with printing. If the problem is not resolved, close
    unneeded processes too.
    • Check that the latest printer driver is being used.

    A print job is canceled.

    • Set I/O Timeout to a larger value than the current
    settings.

    There is considerable delay between
    the print start command and actual
    printing.

    • Processing time depends on data volume. High volume
    data, such as graphics-heavy documents, take longer to
    process. Wait for a while.
    • To speed up printing, reduce the printing resolution using
    the printer driver.

    The whole printout is blurred.

    • Paper is damp. Use paper that has been stored properly.
    See page 17 "Supported Paper".
    • If you enable [Toner Save:], printing is generally less
    dense.
    • Condensation may have collected. If rapid change in
    temperature or humidity occurs, use this machine only
    after it has acclimatized.

    Cannot print properly when using a
    certain application, or cannot print
    image data properly.

    • Change the print quality settings.

    Some characters are printed faintly
    or not printed.
    The paper size setting does not
    match the paper loaded.

    46

    Check whether the paper size specified on the machine
    matches that of the loaded paper.



  • Page 49

    Printer Problems

    Print Positions Do Not Match Display Positions
    If the position of items on the printed page differs from the position displayed on the computer screen,
    the cause may be one of the following.
    Possible Cause

    Solution

    Page layout settings are not configured properly. Check that the page layout settings are properly
    configured in the application.
    The paper size setting does not match the paper
    loaded.

    Check whether the paper size specified on the
    printer driver matches that of the loaded paper.

    47



  • Page 50

    6. Troubleshooting

    Error and Status Messages Appear on the
    Smart Organizing Monitor
    Message
    Printer Power Off
    (Communication
    Error)

    Causes

    Solutions

    • The power cable of the
    machine is not plugged in.

    • Check the printer power cord.

    • The power of the machine
    is not turned ON.

    • Check the USB cable is properly
    connected.

    • Check the printer power switch is on.

    • The USB cable is not
    connected.
    Out of Paper /
    Misfeed

    Paper is not loaded in the
    machine's input tray, or paper
    jam has occurred.

    If paper is not loaded, load paper in the
    input tray. For details about loading
    paper, see page 20 "Loading Paper".
    If paper is jammed inside the machine,
    remove the jammed paper. For details
    about removing jammed paper, see
    page 40 "Paper Feed Problems".

    Paper Size Mismatch

    The paper size specified on the
    machine and the size specified
    in the printer driver do not
    match.

    • For details about specifying the paper
    size setting on the machine, see
    page 20 "Loading Paper". For details
    about changing the paper size setting
    in the printer driver, see the printer
    driver Help.
    • If [Auto Continue:] is set to [0 sec], no
    error message appears.

    Paper Type
    Mismatch

    The paper type specified on the
    machine and the type specified
    in the printer driver do not
    match.

    • For details about changing the paper
    type setting of the machine, see
    page 20 "Loading Paper". For details
    about changing the paper type
    setting in the printer driver, see the
    printer driver Help.
    • If [Auto Continue:] is set to [0 sec], no
    error message appears.

    Memory Overflow

    48

    The data is too large or
    complex to print.

    Select [600 x 600 dpi] in [Resolution:] to
    reduce the size of data. For details, see the
    printer driver Help.



  • Page 51

    Error and Status Messages Appear on the Smart Organizing Monitor

    Message
    Print Cartridge Not
    Detected

    Causes
    The print cartridge has not been
    installed.

    Solutions
    Reinstall the print cartridge. See page 35
    "Replacing the Print Cartridge".

    49



  • Page 52

    6. Troubleshooting

    50



  • Page 53

    7. Appendix
    Notes About the Toner
    • Proper operation cannot be guaranteed if any third-party toner is used.
    • Depending on printing conditions, there are cases where the printer cannot print the number of
    sheets indicated in the specifications.
    • Replace the print cartridge if the printed image suddenly becomes pale or blurred.

    51



  • Page 54

    7. Appendix

    Moving and Transporting the Machine
    This section provides cautions that you must follow when moving the machine both short and long
    distances.
    Repack the machine in its original packing materials when moving it over a long distance.
    • Be sure to disconnect all cables from the machine before transporting it.
    • The machine is a precision piece of machinery. Be sure to handle it carefully when moving it.
    • Make sure to move the machine horizontally. Take extra caution when carrying the machine up or
    down stairs.
    • Do not remove the print cartridge when moving the machine.
    • Be sure to hold the machine level while carrying it. To prevent toner from spilling, move the
    machine carefully.
    1. Be sure to check the following points:
    • The power switch is turned off.
    • The power cord is unplugged from the wall outlet.
    • All other cables are unplugged from the machine.
    2. Lift the machine using the inset grips on both sides of the machine, and then move it
    horizontally to the place where you want to use it.
    • To move the machine over a long distance, pack it well. Take care not to tip or tilt the machine
    during transit.
    • Toner might spill inside the machine if the machine is not kept level during transit.
    • For more information about moving the machine, contact your sales or service representative.

    Disposal
    Ask your sales or service representative for information about correct disposal of this machine.

    Where to Inquire
    Contact your sales or service representative for further information about the topics included in this
    manual or to inquire other topics not included in this manual.

    52



  • Page 55

    Consumables

    Consumables
    Print Cartridge
    Print cartridge
    Black

    Average printable number of pages per cartridge *1
    2,000 pages

    *1 The printable number of pages is based on pages that are compliant with ISO/IEC 19752 with the image
    density set as the factory default. ISO/IEC 19752 is an international standard for measurement of printable
    pages, set by the International Organization for Standardization.

    • Unless a print cartridges is replaced before toner runs out, printing will become impossible. To
    facilitate cartridge replacement, we recommend you purchase and store extra print cartridges.
    • The actual number of printable pages varies depending on the image volume and density, number
    of pages printed at a time, paper type and paper size used, and environmental conditions such as
    temperature and humidity.
    • Print cartridges may need to be changed sooner than indicated above due to deterioration over
    the period of use.
    • Print cartridges are not covered by warranty. However, if there is a problem, contact the store
    where you purchased them.
    • The supplied print cartridge can print approximately 500 pages.
    • This machine periodically performs cleaning. During cleaning, toner will be used to maintain print
    quality.

    53



  • Page 56

    7. Appendix

    Specifications of the Machine
    This section lists the machine's specifications.

    General Function Specifications
    Configuration
    Desktop
    Print process
    Laser electrostatic transfer
    Maximum paper size for printing
    216 mm × 356 mm (8.5 × 14 inches)
    Warm-up time
    Less than 25 seconds (23 °C, 71.6 °F)
    Paper sizes
    A4, 81/2 " × 11 " (Letter), 81/2 " × 14 " (Legal), B5, 51/2 " × 81/2 " (Half Letter), 71/4 " × 101/2
    " (Executive), A5, A6, B6, 16K (197 × 273 mm), 16K (195 × 270 mm), 16K (184 × 260 mm), 8
    " × 13 " (F/GL), 81/2 " × 13 " (FS), 81/4 " × 13 " (Folio), Custom Paper Size
    • The following paper sizes are supported as custom paper sizes:
    • Approximately 90-216 mm (3.6-8.5 inches) in width
    • Approximately 148-356 mm (5.8-14 inches) in length
    Paper type
    Plain Paper (65-99 g/m2 (17-26 lb.)), Recycled Paper (75-90 g/m2 (20-24 lb.)), Thin Paper
    (52-64 g/m2 (14-17 lb.)), Thick Paper (100-130 g/m2 (26.6-34 lb.))
    Paper output capacity
    10 sheets (70 g/m2, 19 lb.)
    Paper input capacity
    50 sheets (70 g/m2, 19 lb.)
    Memory
    16 MB
    Power requirements
    (mainly Europe and Asia)
    220-240 V, 4 A, 50/60 Hz

    54



  • Page 57

    Specifications of the Machine

    (mainly North America)
    120 V, 6 A, 50/60 Hz
    Power consumption
    • Maximum power consumption
    (mainly Europe and Asia)
    730 W
    (mainly North America)
    680 W
    Machine dimensions (Width × Depth × Height)
    402 × 368.5 × 119 mm (15.8 × 14.5 × 4.7 inches)
    Weight (machine body with consumables)
    Approximately 6.7 kg (14.8 lb.) or less

    Printer Function Specifications
    Printing speed
    • Type 1
    13 pages per minute (A4/Letter)
    • Type 2
    16 pages per minute (A4/Letter)
    Resolution
    600 × 600 dpi (maximum: 1200 × 600 dpi)
    First print speed
    6 seconds or less (From the start of paper feed action to the completion of paper delivery)
    13 seconds or less (From the completion of data processing to the completion of paper delivery)
    Interface
    USB 2.0
    Printer language
    DDST

    55



  • Page 58

    7. Appendix

    Trademarks
    Microsoft®, Windows®, Windows Server®, and Windows Vista® are either registered trademarks or
    trademarks of Microsoft Corporation in the United States and/or other countries.
    Other product names used herein are for identification purposes only and might be trademarks of their
    respective companies. We disclaim any and all rights to those marks.
    The proper names of the Windows operating systems are as follows:
    • The product names of Windows XP are as follows:
    Microsoft® Windows® XP Professional Edition
    Microsoft® Windows® XP Home Edition
    Microsoft® Windows® XP Professional x64 Edition
    • The product names of Windows Vista are as follows:
    Microsoft® Windows Vista® Ultimate
    Microsoft® Windows Vista® Business
    Microsoft® Windows Vista® Home Premium
    Microsoft® Windows Vista® Home Basic
    Microsoft® Windows Vista® Enterprise
    • The product names of Windows 7 are as follows:
    Microsoft® Windows® 7 Home Premium
    Microsoft® Windows® 7 Professional
    Microsoft® Windows® 7 Ultimate
    Microsoft® Windows® 7 Enterprise
    • The product names of Windows 8 are as follows:
    Microsoft® Windows® 8
    Microsoft® Windows® 8 Pro
    Microsoft® Windows® 8 Enterprise
    • The product names of Windows Server 2003 are as follows:
    Microsoft® Windows Server® 2003 Standard Edition
    Microsoft® Windows Server® 2003 Enterprise Edition
    • The product names of Windows Server 2003 R2 are as follows:
    Microsoft® Windows Server® 2003 R2 Standard Edition
    Microsoft® Windows Server® 2003 R2 Enterprise Edition
    • The product names of Windows Server 2008 are as follows:
    Microsoft® Windows Server® 2008 Foundation
    56



  • Page 59

    Trademarks

    Microsoft® Windows Server® 2008 Standard
    Microsoft® Windows Server® 2008 Enterprise
    • The product names of Windows Server 2008 R2 are as follows:
    Microsoft® Windows Server® 2008 R2 Foundation
    Microsoft® Windows Server® 2008 R2 Standard
    Microsoft® Windows Server® 2008 R2 Enterprise
    • The product names of Windows Server 2012 are as follows:
    Microsoft® Windows Server® 2012 Foundation
    Microsoft® Windows Server® 2012 Essentials
    Microsoft® Windows Server® 2012 Standard
    Microsoft product screen shots reprinted with permission from Microsoft Corporation.

    57



  • Page 60

    7. Appendix

    58



  • Page 61

    INDEX
    B

    P

    Basic operation......................................................25
    Changing the custom paper size.........................23
    Cleaning..........................................................37, 38
    Common problems................................................39
    Condition of the machine......................................45
    Configuration page...............................................32
    Consumables.........................................................53

    Paper feed problems.............................................40
    Paper jam........................................................41, 42
    Paper mismatch.....................................................28
    Paper Mismatch.....................................................28
    Print area................................................................19
    Print cartridge..................................................35, 53
    Print quality problems............................................45
    Printer function.......................................................55
    Printer problems.....................................................46

    D

    Q

    Delete.....................................................................14
    Disclaimer.................................................................4
    Driver......................................................................13
    Duplex....................................................................26

    Quick install...........................................................13
    Replace..................................................................35

    E

    S

    Error messages......................................................48
    Exterior...................................................................11

    Smart Organizing Monitor...................................16
    Software.................................................................13
    Specifications..................................................54, 55
    Specifying the paper type and paper size..........22
    Status information..................................................31
    Status messages..................................................... 48
    Supported paper...................................................17
    System information................................................31

    C

    F
    Firmware................................................................34
    I
    Important Safety Instructions............................7, 10
    Install......................................................................13
    Interior..............................................................12, 38
    Introduction..............................................................4
    J
    Job cancel..............................................................27
    L
    Legal prohibition......................................................4
    Loading paper.......................................................20

    R

    T
    Toner.......................................................................51
    Trademarks............................................................56
    Troubleshooting...........................39, 40, 45, 46, 47
    U
    Upgrade.................................................................13

    M
    Machine settings.................................................... 33
    Models.....................................................................6
    Moving...................................................................52
    N
    Non-recommended paper...................................18
    Notes......................................................................51
    59



  • Page 62

    MEMO

    60

    EN GB

    EN US

    EN AU

    M178-8609



  • Page 63

    © 2013



  • Page 64

    EN GB

    EN US

    EN AU

    M178-8609






Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh SP 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh SP 110 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh SP 110

Ricoh SP 110 User Manual - German - 64 pages

Ricoh SP 110 Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info