Manual Renkforce RUSD-1803BT (page 36 of 108) (English, German, Dutch, French)

699229

Zoom out

Zoom in

1/108

Forthefastening,proceedasshowninthefollowinggure:

c) Removal

• Remove the front control panel.

• Carefully remove the plastic frame in the front of the system by bending it slightly to the outside and pulling it off

from the unit.

• Insert the two unlocking keys into the lateral slots in the installation frame until the device unlocks.

• Loosen the screw pin at the back of the device if required.

• Carefully pull out the radio with the unlocking keys from the installation frame.

• Remove all plug connections at the back of the unit.

d) Hands-Free Microphone

The microphone for the hands-free system can be attached to the sunblind, the steering column cover or any other

suitable position inside the vehicle.

The microphone and connection line must never be in the airbag trigger area.

• Attach the hands-free microphone in a suitable position with the clamp.

• Place the connection line to the radio installation slot.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce RUSD-1803BT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Renkforce RUSD-1803BT Manual

Product: