Manual Renkforce EMT2500ET (page 4 of 6) (English, German, Dutch)

656680

Zoom out

Zoom in

1/6

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the

technical status at the time of printing.

Operation

a) Charging the rechargeable battery

The built-in rechargeable battery allows settings to be saved if the product is

disconnected from the power supply briey (e.g. in case of a power outage or when

plugging into a dierent power outlet). The rechargeable battery must be charged

before you use the product. Proceed as follows to do so:

• Plug the product into a common household power outlet.

• The product must be plugged into a power outlet for approx. 5 - 6 hours without

interruption for the rechargeable battery to charge fully.

• Do not unplug the product from the power outlet before the rechargeable battery

is fully charged.

Settings are saved for max. 6 months when the product is unplugged from

the power outlet. If this period is exceeded, you must make all settings

again.

b) Setting the clock

• In normal display mode, press and hold the + button until the hour indicator starts

ashing.

• Press the + or – button to set the hours.

• Press the OK button to conrm. The minute indicator starts ashing.

• Press the + or – button to set the minutes.

• Press the OK button to conrm. The clock is now set and the time of day is shown

on the display.

c) Programming the time switch

• In normal display mode, press and hold the – button until the small arrow on the

display starts ashing.

• Move the arrow using the + or – button until the arrow points at the desired

switch-on time. Each press of the button corresponds to an interval of 30 minutes.

• Press the OK button. The section the arrow is pointing at will be marked in black.

This means that a connected electric appliance will be turned on at this time. If

necessary, press the OK button again to delete the black marking.

• Press and hold the + or – button to mark all sections in black as the arrow passes.

• Press the OK button to conrm. The display shows all switch-on times.

• All settings will be saved if no further button is pressed within 10 seconds.

d) Connection

• Make all settings following the above instructions.

• Unplug the product from the power outlet.

• Turn o the electric appliance you wish to connect.

• Plug the electric appliance into the power outlet on the product.

• Plug the product into a common household power outlet.

• Switch on the electric appliance.

• The connected electric appliance is turned on/o automatically dependent on user

settings.

• To disconnect the electric appliance from the product, rst turn o the electric

appliance. Then unplug the product from the power outlet. Now you may unplug the

electric appliance from the product.

e) Manual power on/o

In normal display mode, press the OK button to toggle between 3 dierent modes. The

corresponding indicator is shown on the display.

Indicator Meaning

The connected electric appliance is on constantly, independent of

user settings.

OFF

The connected electric appliance is o constantly, independent of

user settings.

AUTO

The connected electric appliance is turned on/o automatically

dependent on user settings.

f) Reset settings

Press the reset button R with a pointed object to erase all user settings.

Maintenance and cleaning

• This product does not require maintenance. There are no user-serviceable

parts inside the product. Therefore, do never open/dismantle the product. Have

maintenance and repairs done by qualied experts or repair shops only.

• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical

solutions as they can cause damage to the housing and malfunctioning.

• Never submerge the product in water or other liquids.

• Disconnect the product from the power outlet and from the connected electric

appliance before cleaning.

• To clean the product, a dry, soft and clean cloth is sucient. Do not apply too much

pressure to the housing to prevent scratching.

• You can use a long-haired, soft and clean brush and a vacuum cleaner to remove

dust.

Disposal

a) Product

Electronic devices are recyclable waste and must not be disposed of in the

household waste.

At the end of its service life, dispose of the product according to the

relevant statutory regulations.

The built-in rechargeable battery must be disposed of by a specialist.

b) Rechargeable batteries

You as the end user are required by law (Battery Ordinance) to return all used

rechargeable batteries. Disposing of them in the household waste is prohibited.

Contaminated rechargeable batteries are labelled with this symbol to

indicate that disposal in the domestic waste is forbidden. The designations

for the heavy metals involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead

(name on rechargeable batteries, e.g. below the trash icon on the left).

Used rechargeable batteries can be returned to collection points in your

municipality, our stores or wherever rechargeable batteries are sold.

You thus full your statutory obligations and contribute to the protection of the

environment.

Technical data

Operating voltage................................230 V/AC, 50 Hz

Connected load ...................................max. 1800 W

Output current .....................................8 A

Operating conditions ..........................0 to +55 ºC, 0 – 90 % RH

Storage conditions..............................0 to +55 ºC, 0 – 90 % RH

Dimensions (W x H x D)......................56 x 122 x 36 mm (without plug)

Weight ...................................................144 g

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce EMT2500ET in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Renkforce EMT2500ET Manual

Product: