Manual Remotec BW0378 - Universal Remote Control (page 3 of 26) (English, German, French, Italian, Spanish)

485099

Zoom out

Zoom in

1/26

English

By Searching Through the Library

If you cannot identify a correct Device Code for your equipment from the Device

Code list, you may search the code through the library:-

1. Turn on your device manually (e.g. TV).

2. Press a desired Device Mode Key (e.g. ).

3. Hold down “ P+ ” and “ VOL– ” on the URC together simultaneously for 2

seconds until the indicator lights up.

4. Enter a corresponding Magic Search Code from following table. The in-

dicator should go out immediately.

DEVICE TYPE: TV VCR SAT CTV DVD

MAGIC SEARCH CODE:

0001 0002 0003 0004 0005

(e.g. press device mode key, then press “ P+ ” and “ VOL– ” , and enter

TV Magic Search Code 0001.)

5. Press the same desired device mode key again as in step 2 above. (e.g. )

6. Hold down “ P+ ” & “ VOL– ” together simultaneously for 2 seconds until

the indicator lights up, and your URC is ready to start searching.

7. Aim the URC at your device (e.g. TV), press the “ ” key repeatedly, slowly

and patiently until the device has been turned off.

Once your device has been turned off, immediately press “ P+ ” and

“ VOL– ” to lock in code and the indicator should go out.

* Simply repeat the above setup procedures to search the Device Code for

your VCR, SAT, DVD or CTV. (Remember to press a correct Device Mode

Key and correct Magic Search Code in step 2-5 above)

IMPORTANT:

– If the power on/off function of your device is not infra-red controlled - you

need to follow steps 2 to 6 above and start searching :-

• Press “ ” and another important function key alternately until your

device responds to the expected function, press “ P+ ” and “ VOL– ” to

lock in the code.

e.g. Press “ ” & “ 1 ” alternately, or ;

Press “ ” & “ ” alternately.

Note:

– DVD, CTV and other device codes can be searched and locked into any

device modes except “TV” & “VCR” modes. Just simply press the corre-

sponding device mode key in step 2 & 5 and enter an appropriate Magic

Search Code for your DVD, CTV and other devices.

– Each time you press the “ ”, the URC will skip to the next code and

send out a POWER signal trying to turn off your device.

If you failed to stop pressing “ ” in time when your device has been

turned off, turn on your device again immediately. Before the indicator

goes out, press “ ” on the URC to skip backward. Repeat the step 7

above and lock in code.

– If the indicator flashes twice after your pressing of “ ” key, you are

already at the last code of the library. Press “ P+ ” and “ VOL– ” to resume

the URC and repeat carefully the above procedures to search again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remotec BW0378 - Universal Remote Control in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remotec BW0378 - Universal Remote Control Manual

Product: