587576
26
Zoom out
Zoom in
Previous page
1/32
Next page
Before start up
After successful leakage test, the
vacuum pump must be connected
with the pressure gauge station
to the valve connections of the
exterior unit (see chapter „Leakage
test“) to create a vacuum.
Before initial start up of the units
and after entry into the refrigerant
circuit, the following tests must be
Add refrigerant
The units have a base antifreeze
filling. In addition, for refrigerant
line length of more than 5 meters
per circuit, an additional amount
of refrigerant must be added,
according to the following chart:
ATY 260 ATY 350
Single line
length Additional quantity
Up to and
including 5 m 0 g/m
5 m to
max. 15 m 10 g/m
Make sure that the refrigerant
in use is always supplemented
in liquid form!
NOTE
Electrical wiring schematic
made and documented in the start
up protocol:
■
Check all refrigerant lines and
valves with leak detection spray
or soapy water for leaks and for
inadvertent mix up of suction
and injection line.
With the unit at a standstill.
■
Check the refrigerant lines and
insulation for damage.
■
Check the electrical connection
between the interior unit and
the exterior unit for correct
polarity.
■
Check all mountings,
suspensions etc. for proper
support and correct level.
When handling refrigerant,
always were appropriate
protective clothing.
CAUTION
Power
supply
line
Swingmotor
Lamelle 1
Swingmotor
Lamelle 2
Swingmotor
Lamelle 3
Hubmotor
Front 1
Hubmotor
Front 2
CN 6 CN 8 CN 9 CN 10 CN 11 CN 1 CN 4
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3
1 2 3
N2
1N 2 3 4 5
CN 5
1 2 3 4
1 2 3 4
CN 7
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Sensor Umluft
Sensor Frostschutz
Anzeigedisplay
Taste
manueller Betrieb
1 2
1 2
Sicherung
250V 3A N3
N1
Ry2
Ry3
Ry1
Ry3
CN 3
1 2 3
1 2 3
Ionen-Generator
N L PE
Display
Antifreeze sensor
Air circulation sensor
Evaporator
fan
Swing motors
Ion generator
Fuse
Lift motors
Button
manual operation
Control
line
R
S
B
C
D
C
A
BK
BU
BU
WH
YE
BK
BU
RD
RD RD
RD
Control
line
Evaporator fan
Com-
pressor
Condenser, combined
Reverse valve
ATY 260 AT / ATY 350 AT
Color identification
WH = White
BU = Blue
BR = Brown
BK = Black
RD = Red
YE = Yellow
ATY 260 IT / ATY 350 IT
REMKO ATY
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ATY260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ATY260 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ATY260

REMKO ATY260 Additional guide - German - 1 pages

REMKO ATY260 User Manual - German - 32 pages

REMKO ATY260 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info