587877
5
Zoom out
Zoom in
Previous page
1/16
Next page
5
Electrical connection
The units operate
on 230V
AC/50 Hz
Electrical connection takes place
using the fitted power cord
with safety plug.
Cables must only be extended
depending on the cable length,
unit rating and taking local use
into account.
Installation
For optimal and reliable unit
operation, the following
information must be observed in
any event:
The units must be installed
stable and horizontal to
ensure unhindered condensate
drainage.
The units should be placed
in the centre of the room if
possible to ensure optimal air
circulation.
It must be ensured that the
room air can be sucked in and
blown out freely.
A minimum distance of 40 cm
to walls and 60 cm above the
unit must be maintained in any
event.
The units must not be installed
in the immediate vicinity of
radiators or other heat sources.
Optimal room air circulation is
achieved when the units are
installed about 1 m above the
ground.
The room to be dried or dehu-
midified must always be closed
from the ambient atmosphere.
Open windows, doors, etc., as
well as frequently entering and
leaving the room should be
avoided as far as possible.
The units must not be used in
dusty, chlorine or ammonia-
containing atmospheres.
The unit output depends
solely on the room conditions,
room temperature, relative
humidity and observance of the
installation instructions.
ATTENTION
All extension cables must only
be used uncoiled.
wall distance
minimum 0.4 m
maintain distance to radiators or
other heat sources.
keep windows and doors closed!
Diagram showing installation of the REMKO dehumidifier
NOTE
For installation of the units
in damp areas such as utility
rooms, shower rooms or
similar, the units must be
protected with a residual-
current-operated circuit-
breaker complying with the
requirements.
ATTENTION
The unit must not be discon-
nected from the supply before
the after-running time of 2
minutes has elapsed.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ASF100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ASF100 in the language / languages: English as an attachment in your email.

The manual is 0.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ASF100

REMKO ASF100 User Manual - German - 16 pages

REMKO ASF100 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info