587877
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
REMKO ASF 100
Unit description
Operation
The units can be switched on and
off with the ON/OFF button.
The LED of the last selected mode
lights up in the control panel.
The recirculation fan draws in the
humid room air via the inlet grille
with filter, condenser and follow-
ing adsorption rotor.
In the internal regeneration circuit,
the air flows across a heating ele-
ment, dries the adsorption rotor
and passes the humid air through
the condenser.
On the cooler condenser, heat is
removed from the room air and
cooled to below dew-point. The
water vapour contained in the
room air deposits as condensate.
Depending on the room air tem-
perature and relative humidity,
the condensed water constantly
drips through the integrated drain
connection into the condensate
container located below.
The conditioned drier air continu-
ously mixes with the room air. Due
to the constant circulation of the
room air through the unit, the
relative humidity in the room is
gradually reduced to the required
humidity (45% relative humidity).
A float switch in the condensate
container interrupts dehumidifica-
tion via a microswitch when the
container is full. The units switch
off with an audible signal
(5x) and the „FULL TANK“ indica-
tor light illuminates on the control
panel. This does not extinguish
until the emptied condensate con-
tainer is refitted. The units return
to the previously selected mode.
In an unsupervised continuous
mode with external condensate
connection, the produced
condensate is continuously drained
via a hose connection on the
condensate container.
The units are designed for
universal and problem-free
dehumidification.
Owing to their compact size, they
are easy to transport and install.
The units operate according to the
adsorption principle and are pro-
vided with ioniser, low noise and
maintenance recirculation fans as
well as a power cord with plug.
The fully automatic control, the
condensate container with inte-
grated overflow protection and the
drain connection for direct con-
densate discharge ensure trouble-
free operation.
The units comply with the
fundamental safety and health
requirements of the pertinent EU
directives.
The units are reliable and easy to
operate.
The units are used wherever
dehumidification is necessary and
consequential damage (e.g. due to
mould formation) is to be avoided.
The units are also suitable for
drying and dehumidification of:
Living rooms, bedrooms,
shower or cellar rooms, lofts
Utility rooms, weekend homes,
caravans
Museums, archives, laboratories
Wellness areas, washrooms and
changing rooms, etc.
Garages, store rooms
The air flow is cooled on its way through or via the condenser to
below the dew point. The water vapour condenses and is collected
in a condensate trap and discharged.
saturated air
condenser
condensate container
humid
room air
regenerative
heating element
adsorption rotor dehumidified
room air
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ASF100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ASF100 in the language / languages: English as an attachment in your email.

The manual is 0.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ASF100

REMKO ASF100 User Manual - German - 16 pages

REMKO ASF100 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info