716210
7
Zoom out
Zoom in
Previous page
1/33
Next page
1312
1. Radiant heater with 1 tube
2. Light as indicator for on”
3.
pull cord for switching the
unit on/off
J
K
1 x
1 x
H I
1 x 1 x
Items delivered
A
D
B
E F
C
G
1 x
1 x 1 x
1 x
1 x
3 x
5 x
Assembly of changing table heater with pedestal
1.
Insert the 5 feet (B) into the
foot connector system (A) as
shown in.
2. Place the foot cover (C) on top.
3.
Insert the lower attachment tube
(D) into the opening.
4.
Fix the lower attachment tube in
position by inserting the plastic
screw (E) from below.
5. Slide a cable holder (G) over the
lower attachment tube.
6.
Connect the middle attachment
tube (H) with the groove to
the lower attachment tube as
shown in and turn the middle
attachment tube until the holes
in both tubes align.
7. Fix the middle attachment tube into place using the supplied screw (H)
and a Philips screwdriver.
8. Slide the remaining cable holder (G) over the middle tube and connect
the upper attachment tube (I) to the middle attachment tube. Fix the
upper attachment tube in position using the supplied screw and a
Philips screwdriver.
9. Remove the assembly plate from the unit as shown in.
10. Place the changing table heater (J) on the pedestal and fix it in position
with the plastic screw (F).
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reer 19050 EasyHeat Flex at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reer 19050 EasyHeat Flex in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 13,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info