Manual Reer 19050 EasyHeat Flex (page 6 of 33) (English, German, Dutch, Danish, French, Italian, Polish, Spanish)

716210

Zoom out

Zoom in

1/33

1110

EasyHeat Flex - changing table heater

We are pleased that you have chosen this product and would like to thank you the trust you are showing in us. To

enjoy the changing table heater to the full, we would ask you to read the following instructions carefully, store this

instruction manual in a safe place and pass it on to the relevant user.

The changing table heater generates comfortable instant heat in the area around changing tables. It can also be

used to warm up bathrooms, hobby rooms, entrance halls, protected patios and balconies quickly. The radiant heat

ensure that the surrounding space warms up economically within a few seconds.

Please take a few minutes to read the safety instructions carefully and in full. The instructions in the manual must

be followed to avoid damaging the changing table heater. At worst, the unit may constitute a safety or accident

hazard for your child, yourself or others.3

General safety instructions

! This product is not intended as a main heating unit!

! The unit must only be used for the purposes described herein. Improper use may result in the loss of any and

all claims under warranty.

! Check that the information on the nameplate corresponds with the mains voltage in your area.

! The unit must not be used if it shows any sign of a fault.

! If the unit is used as a changing table heater, it must never be used without supervision.

! The maximum exposure time must not exceed 15 minutes.

! A minimum distance of 100 cm between the heater and the table must be observed at all times.

! Keep the supply line away from all hot equipment components, as well as other electrical appliances.

Avoid additional heat radiation, such as sunlight or other sources of radiation, as this can cause your baby‘s

body temperature to rise.

! The heater must not be used, if a child has a temperature, as this may cause overheating.

! Do not touch the unit when it is in operation.

! The equipment must be connected directly to a power outlet. Do not connect the equipment to units such as

a timer, remote control unit etc., as this constitutes a ﬁre hazard.

! The unit remains hot even after it is switched oﬀ. Do not cover the changing table heater! Fire hazard.

Remove all packaging and any surplus components before ﬁrst use to prevent your child being injured or choking.

Technical speciﬁcation

• rated voltage: 230 V AC

• output: 500 W

• mounting style: Power lead

• protection class: 1

• integrated switch-oﬀ function if tilted (tilt angle: 25°)

• lead length: 185 cm (incl. safety plug)

•

heat radiation and temperature distribution tested in accordance

with the medical product standard (IEC60601-2-21:2009, AMD1:2016)

! Use the unit only out of the reach of children. Secure the power lead and ensure that it cannot be accidentally

pulled out causing the unit to fall on the ﬂoor.

This equipment is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience or knowledge, unless they are supervised whilst using it or have been shown

how to use it correctly by a person responsible for their safety.

! Do not use the equipment if it or its power lead is damaged.

! Repairs must be carried out by qualiﬁed and skilled personnel only. Improper repairs may pose considerable

risks to the user – this includes changing the power lead.

Cleaning, maintenance

•

Before cleaning, ensure that the unit is switched oﬀ and cooled down (pull out the power plug). Clean the

surface with a dry, slightly damp cloth. The reﬂector and heating tubes must be cleaned by skilled personnel only.

• This product does not require any special maintenance.

• Repairs must be carried out by skilled personnel only.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Reer 19050 EasyHeat Flex in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 13,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Reer 19050 EasyHeat Flex Manual

Product: