Voltage .....................................................................................................................220-240 V, 50/60 Hz
Power ......................................................................................................................................2000-2400 W
Adjustable steam output ............................................................................................... up to 25 g/min
Control .......................................................................................................................................mechanical
Power cord length..............................................................................................................................1.8 m
Package Includes
Iron ...........................................................................................................................................................1 pc.
Measuring cup ...................................................................................................................................... 1 pc.
User manual .......................................................................................................................................... 1 pc.
Service booklet .....................................................................................................................................1 pc.
The manufacturer reserves the right to make any modications to design, packaging, or technical
specications of the product without prior notice.
Iron parts A1
1. Water spray.
2. Water tank cap.
3. Steam output control dial enables to adjust steam output (depending on fabric), or to
disable steam feature.
4. Steam Shot button is used to release a powerful burst of steam during steam ironing
and vertical steaming.
5. Water spray button is used to dampen hard-to-iron fabrics.
6. Auto shut-off indicator starts ashing after iron is left unattended for 8minutes in
vertical position, for 30 seconds in horizontal position (preceded by an audible signal).
7. Swivel power cord prolongs service life and ensures safety and comfort of use.
8. Power cord.
9. Heating indicator lights up to indicate that iron is heating and goes out to indicate
that selected temperature has been reached.
10. Extra-large 350 ml water tank.
11. Temperature control dial.
12.
Self-clean feature “Calc Clean” is used to reduce lime scale build-up and improve
efciency of your iron.
13. Water tank “Max” ll line (in vertical position).
14.
Ceramic coating and carefully crafted design of the soleplate ensure even steam
distribution across the entire soleplate.
15. Measuring cup.
I. PRIOR TO FIRST USE
Carefully take the appliance and its detachable parts out of the package. Remove all wrap-
ping material and stickers except for serial number identication sticker.
No serial number identication sticker on the appliance automatically disables the user’s
right to aftersales service.
Wipe the base of the appliance with a damp cloth, then let dry. You may notice foreign smell
when rst using the appliance, this does not mean its malfunction.
After the appliance transportation or storage at low temperature keep it at room temperature for
at least two hours before plugging in.
II. OPERATING THE IRON
To ll water tank
1.
Ensure that the iron is unplugged from the electrical outlet. Turn the temperature
control dial into “Min” position and the steam output control dial into position.
2. Open the water tank cap and tilt the iron. Using the measuring cup ll the tank below
the “Max” ll line on the housing. Close the water tank.
3. Position the iron vertically.
CAUTION! Do not ll directly from the faucet to prevent water from entering the appliance or
spilling on the power cord.
Use tap water to ll the water tank. Do not ll the tank with distilled (demineralized), softened,
or boiled water to prevent damage and prolong service life of the appliance.
If you have exceptionally hard water in your area use half distilled water and half tap water.
To select the temperature
The REDMOND RI-C222-E Steam Iron is equipped with a temperature control dial. The dial
is provided with standard symbols of temperature modes and the names of fabrics.
Turn the temperature control dial to align the name of fabric with the cursor on the housing (refer to “Fabric
Ironing Chart”). The heating indicator on the housing will light up to indicate heating. Once the soleplate
reaches the required temperature the heating indicator will go out, indicating that the iron is ready to use.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Redmond RI-C222-E at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Redmond RI-C222-E in the language / languages: All languages as an attachment in your email.
The manual is 5,84 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
