566857
2
Zoom out
Zoom in
Previous page
1/4
Next page
HALOGEN HAND LAMP 500W + camera
EN - 2
PLI-126
5) The digital display shows the settings and icons.
Shows that the camera is in picture
mode.
Shows that the camera takes 2
consecutive pictures with detection.
Shows how many pictures have already
been taken.
Shows that an external SD card is
connected.
Shows that the camera is in video mode.
A video recording always lasts 10
seconds.
This is the high resolution icon. If you
see this icon, all pictures are saved in
high resolution.
This is the low resolution icon. If you see
this icon, all pictures are saved in low
resolution.
Icon to show that the camera will show
the day setting on the picture taken.
Icon to show that the camera will show
the day setting on the picture taken.
Delete button to delete pictures from the
memory.
This icon shows that the LUX settings
have been reached and that the camera
is working. This icon will not be visible
when the LUX settings have not yet
been reached. The camera will then not
record any pictures.
Shows the date or time.
EXIT, to leave the settings.
6) The SET button is used to confirm the settings.
7) The MODE button is used to select the camera
settings.
Photo/Picture capacity
NOTE: The number of photos that can be saved
greatly depends on the resolution in which the photos
are taken. The lower the resolution, the more pictures
can be saved. If the built-in memory is full, the camera
will delete the first pictures to make room for the last
pictures. Caution, this only applies for the built-in
memory and not for an external SD card.
The camera is supplied with a SDRAM memory, but an
external SD card with a maximum memory of 1 GB
can be used. If an SD card is used the camera will
save no pictures in the internal memory.
The SD card:
Make sure that the power is switched off when an
SD card is fitted or removed. If an SD card is fitted
make sure the card is fully empty so there are no
longer any pictures on it.
Insert the SD card fully to the end in the correct
direction as shown on the inside of the housing.
To remove the SD card first push the SD card a little
deeper then pull it out.
Then switch the power back on.
NOTE: the time settings are not saved when the
power is switched off.
Setting the functions
1. Setting the date and time.
Switch the power on. The camera will automatically
start up.
Press SET and MODE once
together. On the display the word
“Test” appears. The camera is
now in TEST MODE.
Then press the MODE button until
T,00-00 flashes.
Repeatedly press the SET button to set the hour and
always confirm with the MODE button.
Press the SET button again to set the minutes and
confirm with the MODE button.
Then set the month, year and day in the same way.
The time will always be printed on the pictures!
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Profile PLI-126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Profile PLI-126 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Profile PLI-126

Profile PLI-126 User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info