582126
3
Zoom out
Zoom in
Previous page
1/5
Next page
POWXQ9100 EN
Copyright © 2011 VARO P a g e | 3 www.varo.com
4 MACHINE-SPECIFIC SAFETY WARNINGS
Please read the safety instructions! These instructions will make it easier
for you to handle the device and help prevent misunderstanding and
possible damage or injury.
1. Keep work area clear and well lit.
2. Keep children and bystanders away. Do not let persons not involved in the work near the
work area.
3. Make sure all moving parts are free from interference.
4. Dress properly. Do not wear loose clothing that can be caught in moving parts.
5. Use personal protective equipment. Use safety goggles, ear muffs and gloves. Wear a
dusk mask if working in a dusty environment.
6. Check to make sure that all fixing screws and knobs are tight and the legs are locked
before operating POWXQ9100.
7. Ensure POWXQ9100 is set up on firm, level ground in a stable manner.
8. Be aware of over-balancing. When a large workpiece is cut from one end, the remaining
piece may be heavy enough to tip the POWXQ9100. Always ensure the workpiece is well
supported.
9. Never stand on this product.
10. Only use POWXQ9100 for its prescribed purpose. Any use other than those mentioned in
these instructions will be considered misuse. The manufacturer shall not be liable for any
damage or injury resulting from such cases of misuse.
11. The use of any accessories other than those recommended in the instruction manual may
present a risk of personal injury.
5 ASSEMBLY
5.1 Assembly instructions
1. Put the POWXQ9100 upside down on the ground, loosen the rear leg lock lever (13) and
slide the rear leg (12) from its stored position. Pivot the leg fully and slide down to engage
it in the final locking position. Lock the rear leg lock lever. See figs 1 3.
2. Pivot the foot pedal (5) until it “clicks” into position. See fig 4.
3. Pivot the front legs (7) forward until they “click” into position. See fig 5.
4. If required rotate the rear stability foot (18), until it “clicks” into position and secure with
the locking lever. See fig 6.
5. Turn the POWXQ9100 into an upright position. Ensure all legs are locked firmly in
position, checking the front leg lock indicators (9) are showing the locked symbol. See fig
7.
6. The rear handle (17) is self-assembly. Fit the spacer tube between the bracket and fasten
the handle in position with the bolt and locking knob provided.
7. POWXQ9100 can be moved easily in the assembled state using the front and rear carry
handles (16 & 17) in combination. See fig 8.
5.2 Folding instructions
Reverse the assembly instructions procedure:
1. Ensure that the lock / unlock switch (4) is in the unlock position. See fig 9.
2. Turn the POWXQ9100 upside down. Release the front leg locks (8) and pivot the front
legs into the stored position.
3. Release the foot pedal by disengaging the foot pedal lock (6). Move the foot pedal to the
stored position. See fig 10.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ9100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ9100 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ9100

Powerplus POWXQ9100 User Manual - German - 5 pages

Powerplus POWXQ9100 User Manual - Dutch - 5 pages

Powerplus POWXQ9100 User Manual - French - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info