481013
7
Zoom out
Zoom in
Previous page
1/9
Next page
POWXQ5223 EN
Copyright © 2014 VARO NV Page| 7 www.varo.com
8.2.1 Impact drilling mode: (Fig. 1)
The tool produces an impact force while turning, suitable for masonry drilling, such as drilling
on concrete and bricks.
Make sure the drill is forced against the work piece before starting the tool.
8.2.2 Chiseling mode : (fig. 2)
The tool produces only impact force, suitable for chiseling on concrete and bricks.
Avoid using the chisel as a lever to pry!
8.2.3 Drilling only mode : (Fig. 3)
The tool only has turning action, suitable for drilling on metal and non metal objects.
8.2.4 Idle running mode: (forbidden!!) (Fig. 4)
The tool produces no action with the motor runs idly, this mode is forbidden as this is harmful
for the motor.
9 CLEANING AND MAINTENANCE
Before performing any work on the equipment, pull the power plug.
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Make sure no water can reach the inside of the power tool!
9.2 Replacing coal brushes
Remove and check the carbon brushes regularly. Replace when they have worn down to the
limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon
brushes must be replaced at the same time. Only use original carbon brushes.
9.3 Maintenance
Our machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and
regular cleaning.
9.4 Mains cable and plug
If the connecting cable (or mains plug) is damaged, it must be replaced. Replacement of the
connecting cable should only be carried out by a qualified specialist (qualified electrician).
10 TECHNICAL DATA
Nominal Voltage
230-240V ~ 50 Hz
Power rating
1500W
Hammering frequency
3900min-1
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ5223 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ5223 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ5223

Powerplus POWXQ5223 User Manual - German - 10 pages

Powerplus POWXQ5223 User Manual - Dutch - 12 pages

Powerplus POWXQ5223 User Manual - Dutch - 12 pages

Powerplus POWXQ5223 User Manual - French - 10 pages

Powerplus POWXQ5223 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info