POWXG4037 EN
Copyright © 2019 VARO P a g e | 7 www.varo.com
10.3 Use/Operation
The easiest way to use the blower vac is to place the shoulder strap in a comfortable position
over your shoulder and hold the rear handle at hip height so that the majority of the machine’s
weight rests on the rollers.
When using the blower vac to pick up leaves it is best to move the machine on the rollers. This
ensures that the blower vac is at the perfect height above the ground. The blower vac is
designed only to pick up leaves. To avoid machine damage that is not covered by the warranty;
do not use it to pick up branches, stones or other hard materials.
When using the machine as a leaf blower always work away from solid objects such as walls,
fences, etc. Whilst you work do not place the blower vac tube too close to the leaves. The
machine will be more effective if you keep it at a certain distance away from the leaves and
blow the leaves forwards.
10.4 Switching operating mode (Fig. 6)
To switch the machine from blower mode to vacuum mode, simply switch it off at the main
switch and move the function selector lever to the other position.
10.5 Leaf bag (Fig. 7)
Note: Before you remove and empty the leaf bag ensure that the machine has been
disconnected from the mains power supply.
To empty the leaf bag simply open the zip fastener, empty the bag and then close the zip
fastener again.
When the leaf bag is open you can also check the function of the blower vac’s slide control. If
there is a blockage in the machine, check this function and remove the blockage.
11 MAINTENANCE
Check the blower vac for any signs of damage before each use
After using the machine
1. Empty the leaf bag.
2. Check the vacuum tube and remove leaf residue.
3. Check the blower vac’s slide control for leaf residue.
4. Clean the machine with a soft dry cloth.
5. Store the machine in a safe place where it is out of the reach of children.
6. Clearing the impeller from debris
Warning! Unplug the machine before clearing the impeller, use gloves!
Unscrew the knob of the impeller access door. Wearing gloves, carefully
clear the impeller from debris
