645073
5
Zoom out
Zoom in
Previous page
1/9
Next page
POWX1420 EN
Copyright © 2016 VARO P a g e | 5 www.varo.com
6 ASSEMBLY
Check for damage to the tool, parts and accessories which may have occurred during
transportation. Take some time to read this manual carefully and understand all the content
prior to assembly and operation.
CAUTION! Always ensure that the tool is switched off and unplugged from
the mains supply before assembly.
6.1 Changing the blade (Fig. 1, 2, 3)
Place the saw on its side of a flat surface.
Rotate the saw blade (13) by hand while depressing the spindle lock button (8) until the
blade is locked. Turn the blade clamp screw (3) use the hex (D) provided in anti-clockwise
direction.
Remove the blade clamp screw (3), the washer and the outer flange.
Lift the lower guard (10) by using the lower guard lever (4) and remove the blade (13).
Clean the saw blade flanges and then mount the new saw blade onto the spindle, which is
against the inner flange.
Make sure the saw teeth and arrow on the blade point in the same direction
Reinstall the outer flange, washer and tighten the blade clamp screw (3).
Make sure the saw blade (13) can turn freely by turning the blade by hand.
6.2 Parallel cut adjustment (Fig 4)
Loosen the edge guide locking screw (2).
Slide the edge guide (C) through the slots in the base plate (14) to the desired width.
Tighten the edge guide locking screw (2) to secure it in the position.
Ensure that the fence guide (C) rests against the wood along its entire length to give a
consistent parallel cuts.
6.3 Dust extraction (Fig. 5)
The circular saw is a powerful tool capable of producing a large amount of dust. As the tool
has a fully enclosed blade, forced dust extraction is particularly efficient. Forced dust
extraction should be used for all but small trimming jobs.
Push the dust extraction hose (B) on to the dust extraction nozzle (12).
Connect a vacuum device approved for the extraction of sawdust and splinters to the dust
extraction hose (B).
7 OPERATION
7.1 Switching on and off (Fig. 6)
Note: Before engaging the on/off switch, check the saw blade to see if it is
fitted properly and runs smoothly, and the blade clamp screw is well
tightened.
Connect the plug to the power supply.
To start the tool, depress the unlock button (5) and press the switch trigger (6).
Release the trigger (6) to turn the tool off.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1420 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1420

Powerplus POWX1420 User Manual - German - 10 pages

Powerplus POWX1420 User Manual - Dutch - 10 pages

Powerplus POWX1420 User Manual - French - 10 pages

Powerplus POWX1420 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info