645089
7
Zoom out
Zoom in
Previous page
1/9
Next page
POWX0478 EN
Copyright © 2016 VARO P a g e | 7 www.varo.com
Hold the sanding pad firmly, and then turn the wrench to dismount the pad.
Install new sanding pad by tightening the bolt.
Attention: Only install the specified sanding pad on the machine.
8.4 Stick the sanding paper to the pad
Please ensure the holes on the sanding paper to fit the holes on the pad accurately.
8.5 Two options for extracting dust
There are internal extraction and external extraction for dust particles. The 6-hole internal
extraction system collects fine dust particles, enabling to adhere to wall and ceiling, obtaining
perfect effect of extracting dust.
8.6 Connect to dust bag
Dust bag has already connected to the hose. Please ensure the dust bag to be cleaned in due
time.
8.7 Operation on high wall (Fig. 5)
The machine can be backed with belt when climbing on the ladders to sand high walls.
8.8 Suction power adjustment (Fig. 6)
Reduce the suction power by turning the wheel to the left, and increase by turning it to the
right.
9 SANDING OPERATIONS
Begin sanding and carefully contact the work surface as lightly as possible-just enough to
keep the sanding head flat against the surface.
The joist in the sanding head allow the sanding disc to follow the contours of the work
surface.
The best technique is to use overlapping sweeps and keep the head in constant motion.
Never stop too long in any one place or there will be swirl marks. With experience it will be
very easy to create excellent results.
NOTE: Ensure that the sandpaper you are using is suited to the task, Overly
coarse grit paper may remove material too quickly to control. While overly
fine grit paper may clog too often and not shape down the surface.
CAUTION: Take care to avoid sharp projections and nails, etc. This will wipe
out the sandpaper and probably damage the sponge pad as well.
10 CLEANING AND MAINTENANCE
10.1 Keep tool clean
Periodically blow out all air passages with dry compressed air. All plastic parts should be
cleaned with a soft damp cloth. NEVER use solvents to clean plastic pats. They could possibly
dissolve or otherwise damage the material.
Wear safety glasses while using compressed air.
Clean the vacuum swivel connector as too much dust will keep it from turning freely.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0478 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0478 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0478

Powerplus POWX0478 User Manual - German - 10 pages

Powerplus POWX0478 User Manual - Dutch - 10 pages

Powerplus POWX0478 User Manual - French - 10 pages

Powerplus POWX0478 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info