645089
6
Zoom out
Zoom in
Previous page
1/9
Next page
POWX0478 EN
Copyright © 2016 VARO P a g e | 6 www.varo.com
There are certain applications for which this tool was designed. The manufacturer strongly
recommends that this tool can not be modified and / or used for any application other than
for which it was designed.
Use the machine with both hands at all times. Loss of control can cause personal injury.
Keep power supply cord clear from the working range of the machine. Always lead the
cable away behind you.
Immediately switch off the machine if unusual vibrations or if other malfunctions occur.
Check the machine in order to find out the cause.
The dust that arises when working with this tool can be harmful to health. Use a dust
absorption system and wear a suitable dust protection mask and remove deposited dust
with a vacuum cleaner.
6.1 Electrical connection
The network voltage must conform to the voltage indicated on the tool name plate. Under
no circumstances should the tool be used when the power supply cable is damaged. A
damaged cable must be replaced immediately by an authorized Customer Service Centre.
Do not try to repair the damaged cable yourself. The use of damaged power cables can
lead to an electric shock.
7 ASSEMBLY
7.1 Unpacking
Carefully remove the tool and all loose items from the shipping container.
Retain all packing materials until after you have inspected and satisfactorily operated the
machine.
Before setting up, repair or maintenance of the appliance you must always
turn off the operating switch and pull out the mains plug!
7.2 Before initial operation
Check if the rated frequency of the mains supply corresponds to the details of the type
place.
Before using the tool, read the instruction book carefully.
8 OPERATION
8.1 How to operate
Insert the hose into the dust access of the machine. (Fig. 1)
Tighten the side handle by turning it (Fig. 2)
8.2 Electronic control
This machine has the characteristics as below:
Lock-on switch (5)
Adjustable Speed (4)
8.2.1 Adjusting the rotation speed (Fig. 3)
The speed of the machine is variable to suit different tasks. It can be adjusted from 1500 min
-1
up to 2300 min
-1
by using the thumb wheel. Turn in the counter clockwise direction to
decrease the speed and in the clockwise direction to increase the speed. Generally, you
should use the higher speed for fast stock removal and the lower speed for more precise
control.
8.3 Replace sanding pad (Fig. 4)
Insert the hex wrench (size 5) into the hexagonal screw bolt on the sanding pad
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0478 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0478 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0478

Powerplus POWX0478 User Manual - German - 10 pages

Powerplus POWX0478 User Manual - Dutch - 10 pages

Powerplus POWX0478 User Manual - French - 10 pages

Powerplus POWX0478 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info