628495
104
Zoom out
Zoom in
Previous page
1/105
Next page
F01VTXMODIB2
Toggle status VTX mode on input
B.
F01VTXMODIBx , where x is either 0 or 1 depending
on the current status of VTX mode on input B.
F01VTXMODIA?
Query status of VTX mode on
input A.
F01VTXMODIAx , where x is either 0 or 1 depending
on the current status of VTX mode on input A.
F01VTXMODI*1
Enable VTX mode on inputs A-D .
F01VTXMODI*1111
F01VTXMODI*0
Disable VTX mode on inputs A-D .
F01VTXMODI*0000
F01VTXMODI*1100
Enable VTX mode on inputs A-B
and disable VTX mode on inputs C-
D .
F01VTXMODI*1100
F01VTXMODI*2
Toggle status of VTX mode on
inputs A-D .
F01VTXMODI*abcd , where each of the letters (a, b,
etc.) is either 0 or 1 depending of the current status
VTX mode on the corresponding input. If this
command was sent after the example above, then the
status message would be F01VTXMODI*0011 .
F01VTXMODI*?
Query status of VTX mode on
inputs A-D .
F01VTXMODI*abcd , where each of the letters (a, b,
etc.) is either 0 or 1 depending of the current status
VTX mode on the corresponding input. If this
command was sent after the example above, then the
status message would be F01VTXMODI*0011 .
8.137. VTXMODO -- Enable VTX Mode on Specified Inputs
Vortex devices can be connected to a Polycom VTX 1000 in order to use the wideband capabilities of that device.
When connecting to a VTX 1000, special proccessing is done on the Vortex in order to guarantee compatibility
with the VTX 1000. This command enables processing for the VTX 1000 on the specified line output or outputs.
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information on this type
of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01VTXMODO11
Enable VTX mode on
output 1.
F01VTXMODO11
F01VTXMODOA0
Disable VTX mode on
output A.
F01VTXMODOA0
F01VTXMODO12
Toggle status VTX
mode on output 1.
F01VTXMODO1x , where x is either 0 or 1 depending
on the current status of VTX mode on output 1.
F01VTXMODOA?
Query status of VTX
mode on output A.
F01VTXMODOAx , where x is either 0 or 1 depending
on the current status of VTX mode on output A.
F01VTXMODO*1
Enable VTX mode on
outputs 1-8, A-D .
F01VTXMODO*111111111111
F01VTXMODO*0
Disable VTX mode on
outputs 1-8, A-D .
F01VTXMODO*000000000000
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info