628495
103
Zoom out
Zoom in
Previous page
1/105
Next page
F01SSTEXT0,0,Play that
Set the first line of the
first screen to read
"Play that".
F01SSTEXT0,0,Play that
F01SSTEXT0,1,funky music
Set the second line of
the first screen to read
"funky music".
F01SSTEXT0,1,funky music
F01SSTEXT0,1,?
Query the text of the
second line of the first
screen.
F01SSTEXT0,1,<string> , where <string> is
the text of the second line of the first screen. If this
command was issued after the example above, then
the status message would be
F01SSTEXT0,1,funky music .
8.134. SWRESET -- Perform Soft Reset of System
Executing this command causes the Vortex to perform a software reset. The effect of the software reset is similar
to cycling the power.
Example Description Status Message
F01SWRESET
Perform a software reset.
No status message will be received. The Vortex will reset within a few
seconds.
8.135. SWVER -- Query Software Version
This command is used to query the firmware version of the Vortex.
Example Description Status Message
F01SWVER?
Query current software version.
F01SWVER<string> , where <string> is the current sofware
version. If the software version was 2.5.0, then the status
message would be F01SWVER2.5.0 .
8.136. VTXMODI -- Enable VTX Mode on Specified Inputs
Vortex devices can be connected to a Polycom VTX 1000 in order to use the wideband capabilities of that device.
When connecting to a VTX 1000, special proccessing is done on the Vortex in order to guarantee compatibility
with the VTX 1000. This command enables processing for the VTX 1000 on the specified line input or inputs.
Note that VTX 1000 mode can only be enabled on the line inputs (A-D) .
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information on this type
of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01VTXMODIA1
Enable VTX mode on input A.
F01VTXMODIA1
F01VTXMODIB0
Disable VTX mode on input B.
F01VTXMODIB0
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info