Manual Polti Sani System Polti Check (page 9 of 13) (English)

648795

Zoom out

Zoom in

1/13

The device will then return to its initial confi-

guration and require a LOGIN.

To LOG IN again, you must remove the

CARD from the slot and to insert a card

again.

To end the operations, turn off the machine by

means of the ON-OFF switch (A).

N.B.: If the CARD used to LOG IN is mi

slaid or damaged, it is possible to unlock

the machine using the “SUPER USER”

CARD (S.U.) (included in the supply).

When you insert this CARD into the slot

(D5), the LOGOUT procedure will be car-

ried out automatically and the summary of

the last work session will be printed.

• Press the steam delivery push-button (P) to

obtain the production of steam from the de-

livery device. The delivery lamp (N) will ex-

tinguish when the resistor inside the deli-

very device has reached its running

temperature.

The steam delivery push-button (P) has a

“safe position” so as to avoid accidental de-

livery of steam.

Note:

• While the device is in use, the delivery si-

gnalling lamp (N) lights up and extingui-

shes.

. This indicates that the resistors are starting

to work in order to keep the pressure in the

boiler and the temperature in the delivery

device steady. It is therefore possible to

continue sanitising regularly, as this occur-

rence is normal.

• BEFORE STARTING TO SANITISE, IT IS

ADVISABLE TO DIRECT THE FIRST JET

OF STEAM ONTO A CLOTH OR

DOWNWARDS FOR APPROXIMATELY

30 SECONDS WITHOUT HOOKING UP

THE FITTING FOR THE DISPOSABLE

BOTTLE (Q). THIS WILL ENABLE THE

OPTIMUM TEMPERATURE AND PRES-

SURE TO BE REACHED.

Before treating delicate or special surfaces

with the SANI SYSTEM POLTI sanitising sy-

stem, consult the manufacturer’s instructions

and carry out a test on a hidden part of the

surface or on a sample of the material.

Allow the sanitised part to dry to make sure

that no changes in colour or deformations

have occurred.

Make sure that the surface to be treated is

clean before sanitising it. In the event of

visible dirt, clean the surface before saniti-

sing it.

Direct the steam downwards for 2 se

conds in order to bring all the components

of the machine to their correct tempera-

ture, in order to avoid condensation.

Bring the delivery nozzle into a position per-

pendicular to the surface to be sanitised and

keep it at a distance of 10 cm, as provided by

the spacer, avoiding direct contact of the lat-

ter with the surface. Deliver the steam on a

continuous movement, using “brushing” mo-

vements to cover the surface to be sanitised.

Repeated treatments will lead to more efficient

sanitising of the treated surfaces.

SANI SYSTEM POLTI delivers saturated

steam that, added to HPMED, will dry without

leaving residues within 30 seconds to 1 mi-

nute, depending on the environmental condi-

tions.

To sanitise piping, drains, etc., connect the

delivery nozzle to the adaptor (R), to obtain a

concentrated output jet of steam. Before star-

ting to use the device, make sure that the ma-

terial to be treated can withstand the high

temperature.

Precision: Class 2.5

This device has a handy and accurate indica-

tor (F) for displaying the operating pressure

immediately. When the device is on stand-by,

that is to say it is switched on but no steam is

being delivered, the pressure is kept steady

at between 4 and 6 bars.

SANI SYSTEM CHECK

SANI SYSTEM CHECK M0S08111 2O08:A5 31/07/2008 11.27 Pagina 47

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Sani System Polti Check in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Sani System Polti Check Manual

Product: