This product is not a toy. Do not allow children or pets
to play with this product. This product contains small
components that can be a choking hazard.
The radio equipment operates 2.402 - 2.480 GHz ISM frequency
band(s) and 2.0 mW maximum power.
6.
This guide will help you get started with Polar OH1. For more
help and product information see support.polar.com/en/OH1.
Polar OH1 can be used as a training device that records and
stores data or as a heart rate sensor with a Polar wrist unit.
Charge
Place the sensor into the USB adapter with the lens facing up so
that the contacts on the sensor and USB adapter meet (picture
1). Plug the USB adapter into a computer USB port or USB
power wall outlet (picture 2). Do not charge the device when the
charging contacts are wet.
Use with Polar Beat mobile app
Download Polar Beat onto your mobile device. Turn OH1 on
by pressing the button. Pair the sensor from Beat settings and
follow instructions.
Use with Polar wrist unit
Download Polar Flow app onto your mobile device. Turn OH1
on by pressing the button. Flow app discovers the sensor
automatically and guides you through the setup.
If you want to use a computer, install Polar FlowSync from
flow.polar.com/start, run it, plug the sensor into a USB port
and follow instructions. Remember to pair the sensor with your
wrist unit. See support.polar.com for device-specic pairing
instructions.
Wear on your arm
Place the sensor into the armband holder with the lens facing
up (picture 3). Wear the armband so that the sensor is on the
underside of the armband rmly against your skin (picture 4).
Wear the OH1 around your lower or upper arm, not around your
wrist (picture 5).
Wear with swimming goggles
Place the sensor in one of the included swimming holders, clip
the holder onto your swimming goggles strap (picture 6). The
lens should touch the bare skin of your temple.
Start training
You can record your training session with your wrist unit, Polar
Beat app or with just the OH1 sensor alone. If you want to use
the sensor alone, turn OH1 on by pressing the button until the
lights are switched on and press the button twice to start the
session. When you’re done training press and hold the button
until the lights are switched off.
By default, OH1 sends your HR signal also via ANT+.
You can turn it off from the Polar Beat settings, if you want.
Maintenance
See the armband care label for washing instructions.Treat the
sensor with care.
Materials
Sensor: ABS, ABS+GF, PMMA, SUS 316 (Stainless steel).
MANUFACTURED BY
POLAR ELECTRO OY
PROFESSORINTIE 5
FI-90440 KEMPELE
TEL +358 8 5202 100
www.polar.com
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Polar OH1 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Polar OH1 in the language / languages: English as an attachment in your email.
The manual is 0,81 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
