668002
9
Zoom out
Zoom in
Previous page
1/10
Next page
9
Product Function
Trigger Sync Mode
Coding...
mast er
remove it.
control each other. When group setting is enabled, LCD screen will show the corresponding group. Turn it off to
2
After coding succeeded, the brightness of the same groups of the corresponding LED lights can freely adjust and
of Group B. Adjustment can be made as long as the group that already opened is the same as any of the group.
Group A. When BC on the same group, if need to adjust the brightness of the lights, subject to the brightness
3
When ABC, AB on the same group, if need to adjust the brightness of the lights, subject to the brightness of
Sonnon DL-914 is equipped with wired or wireless triggering
Wired Triggering
trigger, just coding without connecting them via cables one by one.
sets witch opened, LED light will be off, at this time, it will enter to trigger status). If multi lights are needed to
then connect 3.5 port to LED light. When triggering, turn on the LED trigger set switch to trigger (when trigger
with PC trigger port (If not, you may purchase the power adapter with PC port), connect PC port to camera, and
When using wired triggering, you only need one Pixel PC-3.5 connecting cable. But your camera must be equipped
Wireless Triggering
the LED lights that will be joined. After coding succeeded, you may use it.
required to purchase separately. When using with King Pro for wireless triggering, please be sure to coding all
When using wireless triggering, it needs to work with Pixel King Pro transmitter. Pixel King Pro transmitter is
not be available, and it will enter to trigger status.
coding.When triggering, you need to turn on the trigger set sync switch of the LED light. Now, the LED light will
the LCD screen of the LED light will be back to the current status. Then restart King Pro transmitter to complete
time, at this time, King Pro LCD screen will show Coding it means coding is in progress. After coding succeeded,
the LCD screen. And then press the button C on the King PRO transmitter and turn on the power at the same
LED light and turn on the power at the same time. Release the sync switch until BIND RX will be displayed on
1
When using King Pro transmitter for triggering, the coding steps as: press and hold Group B sync switch of the
O
FF
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pixel DL-914 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pixel DL-914 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info