668002
8
Zoom out
Zoom in
Previous page
1/10
Next page
8
Product Function
Single Use
Multi- lights Use
1
2
brightness. (Shown as Figure 2)
into 30 levels from Minimum to Maximum, turn clockwise to increase brightness and turn anticlockwise to reduce
2
After entered to steady mode, turn brightness adjustment switch to adjust LED brightness; light brightness divided
the default brightness of this light as Minimum value. (See Figure 1)
1
Switch on the power after power-on, LCD screen lights up to show current status and enter to steady mode.Now,
can freely adjust and control each other until coding is completed.
freely. Before adjusting wireless brightness, you need to code the lights that will be needed to control. The lights
When using multi Sonnon DL-914 LED lights together, the wireless brightness for every group can be adjusted
receiver. After coding succeeded, just restart the signal transmission LED light.
LED light to complete coding. If you need to use multi LED lights together, repeat the coding setting steps of the
coding succeeded, LED screen will back to the current interface. Restart the power switch of the transmitter signal
on the power at the same time. Release the sync switch until BIND RX will be displayed on the LCD screen. After
and turn on the power at the same time. And then press and hold Group B sync switch of another light and turn
1
First, set one LED light as transmitter for signal transmission, press an hold Group A sync switch of the LED light
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pixel DL-914 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pixel DL-914 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info