491862
5
Zoom out
Zoom in
Previous page
1/144
Next page
02
Connecting the system
Section
5
Engb
English
To prevent damage
WARNING
Use speakers over 50 W (output value)
and between 4
Ω to 8 Ω (impedance
value). Do not use 1
Ω to 3 Ω speakers
for this unit.
The black lead is earth. Please earth
this lead separately from the earth of
high-current products such as power
amps. Do not earth more than one
product together with the earth from
another product. For example, you
must separately earth any amp unit
away from the earth of this product.
Connecting earths together can cause
a re and/or damage the products if
their earths became detached.
When replacing the fuse, be sure to
only use a fuse of the rating prescribed
on this product.
When disconnecting a connector, pull the
connector itself. Do not pull the lead, as
you may pull it out of the connector.
This product cannot be installed in a vehi-
cle without ACC (accessory) position on
the ignition switch.
A
C
C
O
N
S
T
A
R
T
O
F
F
O
N
S
T
A
R
T
O
F
F
ACC position No ACC position
To avoid short-circuiting, cover the discon-
nected lead with insulating tape. It is espe-
cially important to insulate all unused
speaker leads, which if left uncovered may
cause a short circuit.
Refer to the owner’s manual for details on
connecting the power amp and other units,
then make connections accordingly.
Since a unique BPTL circuit is employed, do
not directly earth the
side of the speaker
lead or connect the
side of another side
of the speaker lead together. Be sure to
connect the
side of the speaker lead to
the side of the speaker lead on this prod-
uct.
If the RCA pin jack on this product will not
be used, do not remove the caps attached
to the end of the connector.
Notice for the blue/white lead
When the ignition switch is turned on (ACC
ON), a control signal is output through the
blue/white lead. Connect to an external
power amp’s system remote control termi-
nal (max. 300 mA 12 V DC). The control sig-
nal is output through the blue/white lead,
even if the AV source is switched off.
Be sure not to use this lead as the power
supply lead for the external power amps.
Such connection could cause excessive cur-
rent drain and malfunction.
Be sure not to use this lead as the power
supply lead for the auto-aerial or aerial
booster. Such connection could cause exces-
sive current drain and malfunction.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer SPH-DA100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer SPH-DA100 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 14,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer SPH-DA100

Pioneer SPH-DA100 User Manual - English - 54 pages

Pioneer SPH-DA100 User Manual - German - 54 pages

Pioneer SPH-DA100 User Manual - Dutch - 54 pages

Pioneer SPH-DA100 User Manual - French - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info