140416
63
Zoom out
Zoom in
Previous page
1/236
Next page
63
En
Enjoying through External Equipment
13
English
Watching a DVD image
Connecting a DVD player
Use the INPUT 2 terminal when connecting to a DVD player
and other audiovisual equipment.
Displaying a DVD image
To watch a DVD image, press INPUT 2 on the remote control
unit or press INPUT on the Media Receiver to select INPUT2.
NOTE
If DVD images do not come in clearly, you may need to
change the input signal type setting using the menu. See
page 55.
Refer to your DVD player operation manual for the signal
type.
Using the SCART output function
This function allows you to record DTV progremmes with a
connected VCR or other recording equipment while enjoying
watching the Plasma Display as usual. With this function, you
can also easily enjoy timeshift playback when a DVD recorder
(DVR) is in connection.
The following diagram assumes that you connect a Pioneer
DVR-920H/DVR-930H to the Media Receiver so that you can
enjoy timeshift playback with the recorder.
In addition to the above connections, you need to perform the
following:
See “Switching the SCART output” (page 64) and select
“Fixed on DTV” for “SCART Output” in the Setup menu.
On the DVD recorder (DVR), select the video/audio input
source matching the external input terminal to which the
Media Receiver has been connected. For this method, see
the operation manual that came with the recorder.
Select the input source on the Media Receiver depending on
the terminal to which the output of the DVD recorder (DVR)
has been connected; for the above connection example,
select INPUT 2.
When you complete the above connections and setups, you
can then enjoy timeshift playback with the DVD recorder
(DVR). You can also select the 2-screen or picture-in-picture
mode to watch images coming from the DTV input source and
an external input source (INPUT 2 for the above connection
example) to which the output of the recorder has been
connected.
NOTE
Some DVD recorders (DVRs) may not allow timeshift
playback. Check the operation manual that came with your
recorder.
For details about connection and setting procedures, see the
operation manual that came with your DVD recorder (DVR).
INPUT 1
INPUT 1
CONTROL
SERVICE ONLY
IN OUT
ANT
i /o link.A
SELECT
INPUT
2 3
INPUT 3
HDMI HDMI
SYSTEM CABLE
ANT(DIGITAL)
INOUT
OPTICAL
DIGITAL OUT
COMMON INTERFACE
INPUT 2
COMPONENT VIDEO
Y
AUDIO OUTPUT
INPUT 4
R-AUDIO-L SUB
WOOFER
PB PR
BLACK
WHITE
Media Receiver (rear view)
SCART cable
(commercially available)
Component cable
(commercially
available)
When using
component cable,
select
COMPONENT
for
Input Select
in the
menu. See page 55.
At the same time
connect a SCART
cable to input audio
signals.
DVD player
INPUT 1
INPUT 1
CONTROL
SERVICE ONLY
IN OUT
ANT
i /o link.A
SELECT
INPUT
2 3
INPUT 3
HDMI HDMI
SYSTEM CABLE
ANT(DIGITAL)
INOUT
OPTICAL
DIGITAL OUT
COMMON INTERFACE
INPUT 2
COMPONENT VIDEO
Y
AUDIO OUTPUT
INPUT 4
R-AUDIO-L SUB
WOOFER
PB PR
BLACK
WHITE
COMPONENT
VIDEO OUT
AC IN
DIGITAL
AUDIO OUT
OPTICAL
COAXIAL
CONTROL
IN
RL
AUDIO
VIDEO
S-VIDEO
Y
P
B
P
R
OUT PUT
HDMI OUT
IN PUT 3
AV 1 (RGB) - TVAV 2 (INPUT 1/DECODER)
Media Receiver
(
rear view
)
SCART cable
(commercially
available)
DVR-920H/930H
SCART cable
(commercially available)
PDP506XDE.book Page 63 Friday, June 17, 2005 3:08 PM
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer 506 xde at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer 506 xde in the language / languages: English, German, French as an attachment in your email.

The manual is 13,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer 506 xde

Pioneer 506 xde User Manual - Dutch, Italian, Spanish, Spanish - 236 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info