140416
61
Zoom out
Zoom in
Previous page
1/236
Next page
61
En
Enjoying through External Equipment
13
English
Using HDMI Input
This Plasma Display System is equipped with two HDMI
terminals (INPUT 3 and 4) which accept digital video and audio
signals. To use the HDMI terminal, activate the terminal and
specify the types of video and audio signals to be received from
the connected equipment. For the types of these signals, see
the operation manual that came with the connected
equipment.
Before starting the menu, press INPUT 3 or INPUT 4 on the
remote control unit or press INPUT on the Media Receiver to
select INPUT 3 or INPUT 4.
For audio, the system supports the following:
Linear PCM (STEREO 2ch)
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
NOTE
PC signals are out of correspondence.
Connecting HDMI equipment
When using the INPUT 3 HDMI terminal:
When using the INPUT 4 HDMI terminal:
To activate the HDMI terminal:
When you use the INPUT 3 HDMI terminal, use the following
procedure to activate the terminal.
1 Press HOME MENU.
2 Select “Option” ( / then ENTER).
3 Select “HDMI Input” ( / then ENTER).
4 Select “Setting” ( / then ENTER).
5 Select “Enable” ( / then ENTER).
6 Press HOME MENU to exit the menu.
NOTE
You need not activate the INPUT 4 HDMI terminal; you
cannot manually deactivate this terminal.
To specify the type of digital video signals:
1 Repeat steps 1 to 3 provided for “To activate the HDMI
terminal.
2 Select “Video” ( / then ENTER).
3 Select the type of digital video signals ( / then ENTER).
If you select “Auto”, an attempt will be made to identify
the type of digital video signals when digital video
signals are received.
4 Press HOME MENU to exit the menu.
Input signal correlation table
1920*1080i@50Hz
720*576p@50Hz
1280*720p@50Hz
720(1440)*576i@50Hz
1920*1080i@59.94/60Hz
720*480p@59.94/60Hz
1280*720p@59.94/60Hz
720(1440)*480i@59.94/60Hz
1920*1080p@24Hz
INPUT 1
INPUT 1
CONTROL
SERVICE ONLY
IN OUT
ANT
i /o link.A
SELECT
INPUT
2 3
INPUT 3
HDMI HDMI
SYSTEM CABLE
ANT(DIGITAL)
INOUT
OPTICAL
DIGITAL OUT
COMMON INTERFACE
INPUT 2
COMPONENT VIDEO
Y
AUDIO OUTPUT
INPUT 4
R-AUDIO-L SUB
WOOFER
PB PR
BLACK
WHITE
M
e
di
a
R
ece
i
ver
(
rear v
i
ew
)
HDMI cable
(commercially
available.)
SCART cable
(commercially available.)
Connect the SCART cable only
when inputting analogue audio
signals.
HDMI equipment
Item Description
Disable
(factory default)
Deactivates the HDMI terminal.
Enable Activates the HDMI terminal.
Item Description
Auto
(factory default)
Automatically identifies input digital video signals.
Colour-1 Digital Component Video signals (4:2:2) locked
Colour-2 Digital Component Video signals (4:4:4) locked
Colour-3 Digital RGB signals locked
INPUT 1
INPUT 1
CONTROL
SERVICE ONLY
IN OUT
ANT
i /o link.A
SELECT
INPUT
2 3
INPUT 3
HDMI HDMI
SYSTEM CABLE
ANT(DIGITAL)
INOUT
OPTICAL
DIGITAL OUT
COMMON INTERFACE
INPUT 2
COMPONENT VIDEO
Y
AUDIO OUTPUT
INPUT 4
R-AUDIO-L SUB
WOOFER
PB PR
BLACK
WHITE
M
e
di
a
R
ece
i
ver
(
rear v
i
ew
)
HDMI equipment
HDMI cable
(commercially
available.)
PDP506XDE.book Page 61 Friday, June 17, 2005 3:08 PM
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer 506 xde at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer 506 xde in the language / languages: English, German, French as an attachment in your email.

The manual is 13,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer 506 xde

Pioneer 506 xde User Manual - Dutch, Italian, Spanish, Spanish - 236 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info