429009
3
Zoom out
Zoom in
Previous page
1/7
Next page
1 Push the epilating head in the direction of the
arrows on the back of the appliance (1) and remove
it from the appliance (2) (Fig. 12).
2 Put the trimming head on the appliance (1) and
push it against the direction of the arrows on the
back of the appliance (2) to x it (Fig. 13).
3 Put the comb on the trimming head.
4 Switch on the appliance (Fig. 14).
Note: Speed II does not work when the trimming head is
attached.
5 Stretch the skin with your free hand.
6 Move the appliance against the direction of hair
growth. Make sure the surface of the comb always
stays in contact with the skin (Fig. 15).
7 When you have nished trimming, switch off the
appliance and remove the comb.
Styling with the trimming head.
To style your bikini line, use the trimming head without
the comb. Styling without the comb results in a hair
length of approx. 0.5-1mm. You can be as creative as you
like when you style your bikini line. You can even draw
and cut out a template, e.g. a heart shape, which you can
use to create a personal style.
Note: The trimming head can only be used at speed setting I.
1 Push the epilating head in the direction of the
arrows on the back of the appliance (1) and remove
it from the appliance (2) (Fig. 12).
2 Put the trimming head on the appliance (1) and
push it against the direction of the arrows on the
back of the appliance (2) to x it (Fig. 13).
Note: We advise you not to put the comb on the trimming
head.
3 Switch on the appliance (Fig. 14).
Note: Speed II does not work when the trimming head is
attached.
4 Move the appliance towards the desired contour
of your bikini line, against the direction of hair
growth. Touch the skin lightly with the trimming
head (Fig. 16).
Cleaning and maintenance
Note: Make sure the appliance is switched off and
unplugged before you start to clean it.
Never use scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the
appliance.
Never rinse the appliance or the adapter under the
tap (Fig. 17).
Keep the appliance and the adapter dry (Fig. 18).
Cleaning the attachments
1 Remove any attachment (sensitive area cap,
opti-start cap with massage element, hair-lifting
attachment with massage element) from the
epilating head (Fig. 19).
Remove the trimming comb by pulling it off the
trimming head (Fig. 20).
2 Remove loose hairs from the attachment with the
cleaning brush.
3 Rinse the attachment under the tap while turning it.
4 Dry the attachment before you use or store it.
Cleaning the epilating head/trimming head
1 Push the epilating head/trimming head in the
direction of the arrows on the back of the
appliance (1) and remove it (2) (Fig. 12).
2 Remove loose hairs with the cleaning
brush (Fig. 21).
3 Rinse the epilating head/trimming head under the
tap for 5-10 seconds while turning it (Fig. 22).
Pull the front cover off the trimming head to remove
any hair that has accumulated inside the trimming
head (Fig. 23).
-
-
-
-
4 Shake the epilating head/trimming
head rmly (Fig. 24).
Dry the epilating/trimming head thoroughly with a tea
towel.
Note: Make sure the epilating head/trimming head is
completely dry before you place it back onto the appliance.
Replacement
All parts of the appliance can be replaced. If you need to
replace one or more of the following parts, go to your
Philips dealer or an authorised Philips service centre:
appliance itself
epilating head
sensitive area cap
opti-start cap with massage element
hair-lifting attachment with massage element
trimming head
comb
cleaning brush
adapter
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
at an ofcial collection point for recycling. By doing
this, you help to preserve the environment (Fig. 25).
Guarantee & service
If you need service or information or if you have a
problem, please visit the Philips website at www.philips.
com or contact the Philips Consumer Care Centre
in your country (you nd its phone number in the
worldwide guarantee leaet). If there is no Consumer
Care Centre in your country, go to your local Philips
dealer.
Troubleshooting
This chapter summarises the most common problems
you could encounter with the appliance. If you are unable
to solve the problem with the information below, contact
the Consumer Care Centre in your country.
-
-
-
-
-
-
-
-
-
-
Problem Cause Solution
Poor epilating results. You move the
appliance in the wrong
direction.
Move the appliance against the direction of hair growth, with
the on/off slide pointing in the direction in which you move the
appliance.
You place the epilating
head on the skin at the
wrong angle.
Make sure that you place the appliance on the skin at an angle
of 90° (see chapter ‘Using the appliance’).
You used a (depilatory)
cream prior to epilation.
Make sure your skin is clean, entirely dry and free from grease.
Do not use any cream before you start epilating.
The hairs are too short. Sometimes hairs are too short to be caught. The optimal length
for easy removal of the hairs is 3-4mm. The hairs that are not
caught during this session will be long enough to be removed
when you epilate the next time. You can also try to catch the
hairs by moving the appliance across the skin a few more times.
The sensitive area cap
is on the epilating head
when you epilate your
legs.
Do not use the sensitive area cap when you epilate your legs,
as the cap reduces the number of active epilating discs. NB:
Never use the epilator without the sensitive area cap when
you epilate your underarms or bikini line.
The appliance does
not work.
The socket to which the
appliance is connected is
not live.
Make sure the socket is live. If you have connected the epilator
to the socket in a bathroom cabinet, you may need to switch
on the bathroom light to activate the socket.
I cannot select speed
setting II.
The trimming head is
attached. The trimming
head can only be used at
speed setting I.
Select speed setting I when you use the trimming head.
I cannot remove the
trimming head/
epilating head from
the appliance.
You try to pull it straight
off.
Push the epilating head/trimming head in the direction of the
arrows on the back of the appliance before you pull it off the
appliance (see chapter ‘Cleaning and maintenance’).
4203.000.4330.1
3/7
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hp6609 satinelle soft total body epilator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hp6609 satinelle soft total body epilator in the language / languages: English, Italian, Turkish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info